Lift Master ​Ball Screw Type

Lift Master
  • ​Cantilever lifter using a Ball screw screw
  • - High efficiency and high speed
    The use of Ball screw makes it possible to obtain a large thrust with a small drive source with high efficiency.
    Its high efficiency allows for easier high-speed operation of the device compared to Trapezoidal Screw.
  • ・Operation precision and controllability
    It is also compatible with servo motor drive, allowing for multi-point position control and multiple synchronized operations.
  • ・Long lifespan
    Highly reliable Ball screw are used, allowing for predictable running life and ensuring a long service life.
  • ・A wide variety of options
    It is also possible to perform complex movements such as rotating Lift Master and tilting the arm.

Banner Image

Features and structure Video content

Benefits of hiring

Specifications (Ball screw type)

  • ・Lifting load: 1.96kN to 9.80kN
  • ・Stroke: 400mm/1,500mm
  • ・Drive unit: with three-phase motor/servo motor
  • ・Speed: 1.5-9.96m/min

Allowable OHL load curve (based on workpiece mounting surface: see outline drawing)

Allowable OHL load curve

Catalogs and Instruction Manuals

For a comparison of Zip Chain mechanism and the screw mechanism, please see here.

Model number display

LME B 0500 H 10 G E
｜
｜
Lift Master		 ｜
Screw type
B: Ball screw		 ｜
Lifting load
0200: 1.96kN {200kgf}
0500: 4.90kN{500kgf}
1000: 9.80kN {1000kgf}		 ｜
speed
S, H, U
The speed of each model
More information
Please refer to.		 ｜
stroke
04: 400mm
06: 600mm
08: 800mm
10: 1000mm
12: 1200mm
15: 1500mm		 ｜
Drive unit
G: With three-phase motor
K: With servo motor		 ｜
option
See below for details

Product model number navigation

Selectable model number:

View product details

*To generate the correct model number, select items in order from left to right.

series Screw type Lifting load speed Stroke Drive unit option

LME















　　

　　

　　

　　

　　









What type of screws are used?

Lifting load

This is the load that can be raised or lowered at the specified center of gravity.

speed

This symbol indicates the lifting speed.

Please refer to the detailed information for the speed values of each model.

Stroke

The distance that can be raised or lowered.

Drive unit

G: Comes with a three-phase motor.

K: It comes with a servo motor.

Option symbol

J: Bellows are attached to the opening.

L1 to L3: Add one to three position detection sensors.

V: This specifies the power supply voltage will be doubled.

E: A rotary encoder is attached to the rear of the motor.

D1 to D3: Change the motor mounting direction.
D1: 90° rotation from the standard position
D2: 180° rotation from the standard installation position
D3: 270° rotation from the standard mounting position

Product model number list

*Click on the model number to display detailed information.

Lifting load
kN{kgf}		 stroke
mm		 Drive unit speed
S H U
1.96 {200} 400 G (with three-phase motor) LMEB0200S04G LMEB0200H04G ---
600 LMEB0200S06G LMEB0200H06G ---
800 LMEB0200S08G LMEB0200H08G ---
1000 LMEB0200S10G LMEB0200H10G ---
1200 LMEB0200S12G LMEB0200H12G ---
1500 LMEB0200S15G LMEB0200H15G ---
4.90 {500} 400 --- LMEB0500H04G LMEB0500U04G
600 --- LMEB0500H06G LMEB0500U06G
800 --- LMEB0500H08G LMEB0500U08G
1000 --- LMEB0500H10G LMEB0500U10G
1200 --- LMEB0500H12G LMEB0500U12G
1500 --- LMEB0500H15G LMEB0500U15G
9.80 {1000} 400 --- LMEB1000H04G LMEB1000U04G
600 --- LMEB1000H06G LMEB1000U06G
800 --- LMEB1000H08G LMEB1000U08G
1000 --- LMEB1000H10G LMEB1000U10G
1200 --- LMEB1000H12G LMEB1000U12G
1500 --- LMEB1000H15G LMEB1000U15G
1.96 {200} 400 K (with servo motor) LMEB0200S04K LMEB0200H04K ---
600 LMEB0200S06K LMEB0200H06K ---
800 LMEB0200S08K LMEB0200H08K ---
1000 LMEB0200S10K LMEB0200H10K ---
1200 LMEB0200S12K LMEB0200H12K ---
1500 LMEB0200S15K LMEB0200H15K ---
4.90 {500} 400 --- LMEB0500H04K LMEB0500U04K
600 --- LMEB0500H06K LMEB0500U06K
800 --- LMEB0500H08K LMEB0500U08K
1000 --- LMEB0500H10K LMEB0500U10K
1200 --- LMEB0500H12K LMEB0500U12K
1500 --- LMEB0500H15K LMEB0500U15K
9.80 {1000} 400 --- LMEB1000H04K LMEB1000U04K
600 --- LMEB1000H06K LMEB1000U06K
800 --- LMEB1000H08K LMEB1000U08K
1000 --- LMEB1000H10K LMEB1000U10K
1200 --- LMEB1000H12K LMEB1000U12K
1500 --- LMEB1000H15K LMEB1000U15K
Back to top of this page

option

Front bellows [option code: J]

- Bellows to prevent dust from entering Lift Master from the front.

Supported stroke: 400mm to 1,200mm

*Please contact us if you require bellows mounting for strokes exceeding 1,200 mm.

*Only for LME0200 series and LME0500 series with strokes of 800mm and 1,200mm.
The effective stroke will be shorter when the front bellows is installed. Please contact us for details.

<Installation reference example>

Please contact us for dimensions.

[Click to enlarge]

Add a position detection sensor [option code: L1 to L3]

・The standard model is equipped with four position detection sensors (two for S-speed only),
Up to three sensors are available for S speed only, and one additional sensor is available for other speeds.

・The option symbol is [L1] for adding one sensor, [L2] for adding two sensors, and [L3] for adding three sensors.
If you would like to add more sensors, please contact us.

Compatible model number L1: All standard model numbers
L2, L3: LMEB0200S, LMEM0500S, LMEM1000S only

Motor voltage 400V class [option code: V]

・Change the drive motor voltage to 400V class.

Compatible models: All standard models

With rotary encoder [Option code: E]

- A rotary encoder can be installed on the shaft end of the non-load side of a three-phase motor, enabling the motor rotation signal to be output.

Compatible model: Standard model with three-phase motor

Features

・Controllability
An open collector output signal can be extracted from the reducer, allowing for a variety of operations.

·compact
There is no need to connect the motor shaft and rotary encoder with a coupling.

・Cost reduction
Compared to conventional separate installations, there is no need for couplings, base plates, or leveling work.

Rotary encoder specifications

Power supply voltage DC4.5～30V
Number of pulses 100
Output format Open collector output (NPN type) 6
AB90° phase difference signal +Z origin signal
Output Circuit

Current consumption 30mA or less
Output Voltage 0.5V or less (At maximum sink current)
Maximum sink current 40mA MAX
Signal rising
Fall time		 1μs or less
Maximum Response Frequency 240kHz
Output circuit withstand voltage 50V MAX
Cable length 0.5m with connector
(Hirose Electric Co., Ltd. DF3-6S-2C)
vibration 4.9m/s 2 {0.5G} or less (20~50Hz)

Structure and dimensions (rotary encoder mounting part)

[Click to enlarge]

Wiring Table

Pin No. color connection
1 red power supply
2 black 0V common
3 blue Signal A
4 white Signal B
5 yellow Signal Z
6 black shield

Motor mounting direction change [Option code: D1 to D3]

- The motor installation direction can be changed depending on the installation location of the equipment, the workpiece installation, the transfer direction of the transported items, etc.

*The overall height may change depending on the motor installation direction and stroke.

*The LME0200S series has the motor attached to the top, so the contact area with the floor is the same as the standard product regardless of the orientation.
Please contact us regarding the dimensions of the motor and flange that protrude from the guide.

*The drawings and dimensions below show the specifications for a three-phase motor. Servo motors are also available as an option, so please contact us for details.

Compatible models: All standard models


[Click to enlarge]

D1: Motor installation direction changed by 90 degrees
D2: Motor installation direction changed 180 degrees
D3: Motor installation direction changed 270 degrees

D1: 90 degree offset D2: 180 degree offset D3: 270 degree offset

[Click to enlarge]

[Click to enlarge]

[Click to enlarge]

<D1 Dimension Comparison Table>

Unit: mm
Model Motor Capacity
kW		 Standard motor mounting direction D1: 90 degree offset
B C D E F M B C D E F M
0200S 0.1 - 250 280 170 200 141 - 250 280 170 200 154
0200H 0.4 245 340 370 193 245 340 370 190 220 160
0500S 0.4
0500H 0.75 270 270 210 240 237
0500U 1.5 273 400 430 200 230 369 318 400 430 255 285 283
1000S 0.75 250 273 240 270 217
1000H 1.5 368.5 318 255 285 293
1000U 2.2 407 343

<D2 dimension comparison table>

Unit: mm
Model Motor Capacity
kW		 Standard motor mounting direction D2: 180 degree offset
B C D E F M B C D E F M
0200S 0.1 - 250 280 170 200 141 - 250 280 170 200 172
0200H 0.4 245 340 370 193 245 340 370 223
0500S 0.4
0500H 0.75 270 265 300
0500U 1.5 273 400 430 200 230 369 273 400 430 200 230 366
1000S 0.75 250 290
1000H 1.5 368.5 366
1000U 2.2 407 416

<D3 Dimension Comparison Table>

Unit: mm
Model Motor Capacity
kW		 Standard motor mounting direction D3: 270 degree offset
B C D E F M B C D E F M
0200S 0.1 - 250 280 170 200 141 - 250 280 170 200 80
0200H 0.4 245 340 370 193 245 340 370 190 220 86
0500S 0.4
0500H 0.75 270 270 210 240 163
0500U 1.5 273 400 430 200 230 369 318 400 430 255 285 209
1000S 0.75 250 273 240 270 123
1000H 1.5 368.5 318 255 285 199
1000U 2.2 407 249

Selection

Our staff will select the lifter that meets your requirements and requirements.
Please click on the "sizing" tab at the top of this page.

Special specification products

Wall mounting specifications

Wall mounting specifications

If Lift Master cannot be installed on the floor, it can also be mounted on a wall, making effective use of the sturdy side of the device frame to save space.

Fall prevention specifications

Fall prevention specifications

A manual fall prevention pin can be attached to Lift Master to prevent it from falling.

Swivel axis specifications

Swivel axis specifications

A manual rotation mechanism is provided at the workpiece mounting section.

Low-profile specification

Low-profile specification

Even if you cannot install Lift Master due to space limitations, we can accommodate you with a reduced height specification.

High-speed specifications

High-speed specifications

This is a high-speed specification with a maximum speed of 500 mm/s. Please provide a servo motor. Please contact us for details. *High-speed specifications up to 300 mm/sec can be operated with a general-purpose motor using inverter control.

Dustproof and waterproof

Dustproof and waterproof

Lift Master is dustproof and drip-proof. It can also be used in environments where cutting oil and coolant are present. *Not suitable for outdoor use.

Horizontal Transfer Mechanism

Horizontal Transfer Mechanism

We can also manufacture Lift Master for horizontal transport.

High rigidity specifications

High rigidity specifications

If shaking during lifting or bending when stopped is an issue, we can address this by strengthening the support pillar itself.

Line shaft synchronous type

Line shaft synchronous type

Lift Master can be connected to Tsubaki's ECHT-FLEX coupling and Miter Gear Box to enable synchronized operation. We provide a system that matches your usage conditions, including Gear Motor.

Back to top of this page