Belt tension meter T-ACE
- Sonic belt tension meter for measuring belt installation tension
- Managing the belt's installation tension is extremely important to ensure that it performs to its full potential.
- T-ACE can measure frequencies from 10 to 5000 Hz, making it suitable for a wide range of layouts.
Features and principles
The belt tension meter uses a microphone to pick up sound waves generated by the amplitude of the belt, converts the frequency into belt tension, and displays it digitally.
Belt tension meter T-ACE Features
- - Bright, easy-to-read organic EL screen
- ・Up to 40 measurement conditions can be registered
- - A wide frequency range of 10 to 5000 Hz can be measured.
- ・Our Synchronous Belts unit mass is installed
Catalogs and Instruction Manuals
Major Specifications
| Measurement range | 10.0Hz to 5000Hz, 0.01 to 99900N (display range) |
|---|---|
| Span Length | 1mm to 9999mm (displayable range) |
| unit mass | 0.1g/mm×m to 999.9g/mm×m (displayable range) |
| Operating temperature and humidity | -10 to 50°C, 80% or less (no condensation) |
| power supply | 2 x AAA batteries |
| Mass and dimensions | 120g (body only), length 160 x width 59 x thickness 26mm |
| accessories | Sensor microphone, dry batteries (2 AAA batteries), portable soft case, Instruction Manuals, operation procedure sheet (portable), warranty card, inspection certificate |
Depending on the combination of measurement conditions, even if installation tension is appropriate, the vibration frequency may be outside the measurable range of this instrument.
(Caution is required if the span length exceeds 1m.)
-A corded sensor microphone (cable length 1m) is also available as an option.
Standard price and delivery
| Model number | Standard price | Delivery |
|---|---|---|
| BDTM201 | お問合せください | お問合せください |
