It is expected to last for over 1 million strokes.

We recommend using a servo motor for control. For three-phase motor specifications, use the optional rotary encoder [option symbol: E].

For a constant load, the repeatability is ±1mm.

By installing a servo motor or a three-phase motor with a rotary encoder [option symbol: E], it becomes possible to control stopping at multiple points.

Self-locking is not possible with the standard specifications. It is possible to change the drive unit to a worm reducer that can be expected to have self-locking properties. Please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

There may be restrictions on the start-up frequency depending on the operating conditions and drive system, so please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

Interlocking operation is possible with either mechanical or electrical systems.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

It may be possible depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

If you wish to use the product in a manner other than the standard installation (lifting), special arrangements will be required. Please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

For the standard model (ZSL1000), it is less than 80dB.

It may be possible depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

We can accommodate special orders. However, please contact us as specifications will need to be considered depending on the servo motor manufacturer and model number.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

For post types, please consider our product "Zip Master ZME."

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

Our Zip Chain Lifter ZSL and Zip Master ZME products come standard with a servo motor.

Yes, we can. Please contact us after filling out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions.

It is possible to change some parts (other than strength components) such as the cover to stainless steel.

Yes, we can. Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

As an option, a 400V motor voltage (option symbol: V) is available.

It cannot be retrofitted. When considering the product, please also consider whether or not you need bellows.

This will vary depending on the conditions of use (temperature, operating frequency, load), so please contact us for details.

To meet the demand for low dust generation, we can provide 1) bellows attachment and 2) specified grease application. This varies depending on the cleanliness level, so please contact us for details.

It is not suitable for outdoor use.
Bellows are available as an option, but we ask that you take appropriate measures such as providing a cover on your equipment.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

It is not dustproof, but an all-around bellows option is available.

Heat-resistant specifications are not available.
However, we can accommodate bellows made from special materials, so please contact us.

It is not intended to be used in places where it may come into contact with water.
Bellows are available as an option, but we ask that you take appropriate measures such as providing a cover on your equipment.

Zip Chain does not have a locking mechanism. Be sure to use it within the specified stroke range.

Please request a non-applicable certificate through your point of purchase.

delivery will be the same.