Bearing unit Diamond Flange /square flange type
- Both front and rear seals effectively extend the life of bearings in wet or dusty environments
- It is lighter and easier to handle than steel bearing units.
-
Purpose
This product is used for bearings of drive shafts, driven shafts, etc. It is sealed on both the front and back, so it can be used in wet and dusty conditions.
-
Usage image
Diamond Flange unit
Cleaning machine
[Click to enlarge]
Cleaning machine
[Click to enlarge]
Bottler (conveyor in water/dusty atmosphere)
[Click to enlarge]
■ Square flange type unit
Cooking equipment (food belt conveyor)
[Click to enlarge]
Cooking equipment (radish peeler)
[Click to enlarge]
Drinking facilities (large amounts of water are used)
[Click to enlarge]
Features
Both front and back stickers
Ordinary bearing units do not have a seal on the back side, allowing moisture to seep in from the back and causing rust. Tsubaki's bearing units have seals on both the front and back, which is effective in extending the life of the bearing.
Normal bearing unit
Tsubaki bearing unit
The housing is rust-resistant
Even if the bearings are oiled, rust will form on the housing, which can be a problem in food factories and other places.
Tsubaki's bearing units have a housing made of reinforced engineering plastic, which prevents rust and keeps them clean.
Lightweight and easy to handle
Compared to steel bearing units, it is significantly lighter and easier to handle.
Lineup
Diamond Flange unit
| type | Closed type | open type |
|---|---|---|
| Model number | TP-C54204NR-ECT-UCFL | TP-C59204NR-ECT-UCFL |
| Shaft hole diameter mm | Φ20,Φ25 | |
| shape |  |
 |
Square flange type unit
| type | Closed type | open type | ||||||
|---|---|---|---|---|---|---|---|---|
| Model number | TP-C50205VREC-UCFQ | TP-C50206VREC-UCFQ | TP-C50207VREC-UCFQ | TP-C50208VREC-UCFQ | TP-C55205VREC-UCFQ | TP-C55206VREC-UCFQ | TP-C55207VREC-UCFQ | TP-C55208VREC-UCFQ |
| Shaft hole diameter mm | Φ25 | Φ30 | Φ35 | Φ40 | Φ25 | Φ30 | Φ35 | Φ40 |
| shape |  |
 |
||||||
