Frame support parts connecting joint
- Connecting Joint
- Used to connect two legs such as reinforcing pipes to stabilize the conveyor.
-
Purpose
The two legs are connected to stabilize the conveyor.
-
Usage image
[Click to enlarge]
[Click to enlarge]
Control panel installation
[Click to enlarge]
Use as an attachment
[Click to enlarge]
For a list of frame support parts and applicable part combinations for each pipe, please refer to the applicable part combination table by pipe size below.
List of connecting joints
| Model number | TP-C14746T-CJ | TP-C14733T-CJ |
|---|---|---|
| type | - | |
| Pipe nominal diameter mm | Φ60.5, Φ42.7 | Φ48.6, Φ42.7 |
| Pipe outer diameter mm | 2, 1¼ | 1½, 1¼ |
| Bolt size | - | |
| shape | |
|
| Body material | reinforced polyamide | |
| Body exterior color | black | |
| Bolt, nut and washer materials | - | |
| Bolt Material | stainless steel | |
| Bush Material | Brass + Ni plating | |
| Nut Material | - | |
| Foot bolt and nut material | - | |
| Anti-slip rubber pad material | - | |
| Anti-slip rubber pad exterior color | - | |
| MB equivalent product | MB137-6502-CJ | MB137-66813-CJ |
