Garbage disposal conveyor chain

Product Photos
  • We offer a variety of specifications that are optimal for the different harsh conditions of each process.
  • This conveyor chain has been specially designed for waste disposal, with wear patterns confirmed for each process to ensure safe use on conveyors in waste disposal processes.

Click here to find the best chains for the different "harsh conditions" in each process

*Please also consider the "Screw Lock Link," a connecting link that makes connection and disconnection easy.

Banner Image

Catalogs and Instruction Manuals

Specifications

Waste treatment process conveyor types Specification Code Process-specific required functions
wear corrosion Poor articulation R rotation failure
Receiving/Supply Conveyor KG KA ◎ - ○ ○
Ash removal conveyor dry method AG AA ○ - ○ ○
Wet method AM - ○ ○ ○
AP ○ ◎ ○ ○
Fly ash transport conveyor general FG ○ - ◎ ○
Corrosive FP - ◎ ◎ ○
Molten slag conveyor YP ◎ ◎ ○ ○

◎: Optimal ○: Suitable

*Each specification takes into account the required functions for each process.

*KA and AA specifications are stronger versions of KG, AG, and AM specifications (approximately twice the tensile strength).

Features of each specification

  • ・KG/KA specifications for receiving and supply conveyors

    The conveyor equipment in the receiving and supply area is the first line to transport collected waste, and depending on the item, heavy items may be fed into it.

    Distortion of the apron due to high loads and impacts from the transported goods increases wear between the bushings and rollers, and dust and other particles adhere to the chain, causing problems such as poor roller rotation.

    Therefore, the KG/KA specifications are designed to focus on wear resistance between the bushing and roller and measures to prevent roller rotation problems.

  • ・AG/AA specifications for ash removal (dry) conveyor

    This equipment cools the ash generated in the incinerator with water and transports the ash after removing some of the moisture. Depending on the transport conditions, the ash may also get on the chain itself.

    This ash builds up and causes problems with chain bending and roller rotation.

    Therefore, the AG/AA specifications are designed to address problems with chain bending and roller rotation.

  • ・AM/AP specifications for ash removal (wet) conveyor

    This conveyor equipment directly transports incineration ash that has been cooled by dropping it into water, and most of the conveyors are used underwater.

    Therefore, this specification adds corrosion prevention measures to the AG/AA specification.

  • ・Fly ash (general) conveyor FG specification

    This is a conveyor that transports fly ash generated after incineration or boiler use.

    Ash gets on the entire chain, causing problems with chain bending and roller rotation.

    Therefore, the specifications are focused on preventing poor bending and roller rotation.

  • ・FP specification for fly ash (corrosive) conveyor

    In fly ash conveyors before the bag filter, slaked lime and other substances are often added to reduce the temperature, which can cause corrosion.

    Therefore, the specifications incorporate corrosion resistance measures for general fly ash transport conveyors.

  • - YP specification for molten slag conveyor

    In conveyor equipment that transports slag generated by melting furnaces, the granulated slag becomes sand-like and gets into the clearances of the chain, causing severe wear to the bushings and rollers.

    Also, part of the chain goes underwater.

    The slag changes the water into a strong alkaline or acidic state, which causes severe corrosion of the chain.

    Therefore, the specifications place emphasis on measures to prevent wear and corrosion of the chain.

Product List

※Click to display detailed information

* Maximum allowable load is a value calculated based on our design standards and is the calculated strength. Unless otherwise specified, Maximum allowable load is used when selecting Large size conveyor chain.
This value varies depending on the manufacturer and is not a guaranteed value.

*Please contact us for average tensile strength.

Metric pitch

size Roller
Type		 Pitch Roller
Outer diameter		 Inner link
Inner width
75mm 100mm 125mm 150mm 200mm 250mm 300mm Φmm mm
RF03 R RF03075R RF03100R --- --- --- --- --- 31.8 15.1
F RF03075F RF03100F --- --- --- --- --- 31.8
RF05 R --- RF05100R RF05125R RF05150R --- --- --- 40 21
F --- RF05100F RF05125F RF05150F --- --- --- 40
RF10 R --- RF10100R RF10125R RF10150R --- --- --- 50.8 28
F --- --- RF10125F RF10150F --- --- --- 50.8
RF12 R --- --- --- --- RF12200R RF12250R --- 65 35.1
F --- --- --- --- RF12200F RF12250F --- 65
RF17 R --- --- --- --- RF17200R RF17250R --- 80 49.4
F --- --- --- --- RF17200F RF17250F --- 80
RF26 R --- --- --- --- --- RF26250R RF26300R 100 55.2
F --- --- --- --- --- RF26250F RF26300F 100
*We may be able to produce pitches other than those listed above. Please contact us. Return to top of page