Power-Lock ML Series
- A simple fastening type that can be easily fastened with just one nut.
- - Can be easily fastened with just one nut, significantly reducing assembly time.
- *Shaft diameters up to Φ32 are ML type, and Φ34 and above are MG type, and the appearances are different.
- * Centering function included. No need for troublesome boss step processing.
- *When assembled, the boss will move slightly toward the rear in the axial direction. Please contact us for details.
Standard Specifications
- - The surface is plated for simple rust prevention, and the nuts also have a special surface treatment, so there is no need to apply oil during assembly.
- -The only one in the series that can be attached to bosses that are shorter than Power-Lock length.
- · The tightening torque can be changed within the range of 1/2 to 1.1 times the standard torque, allowing it to be used in accordance with the boss strength.
- Applicable shaft diameter: Φ5 to Φ75
- トルク範囲：6.76～2000N・m
- Applicable tolerance: Shaft: h8 Hub bore: H8
- Applicable surface roughness: Ra1.6
Structure
Single Taper
Power-Lock ML series consists of four parts: an outer ring, an inner ring, a nut, and a ring spring.
It is divided into four parts.
- The nut and outer ring are interlocked with each other by their respective protrusions and grooves.
The ring spring serves to prevent the outer ring from falling off.
Catalogs and Instruction Manuals
Model number display example
| PL | 040 | X | 067 | MG |
| ｜ Shaft diameter |
｜ Outer diameter |
｜ type M=ML type MG = MG type |
Product List
*Click to display detailed information.
| Standard Specifications |
|---|
| PL034X060MG |
| PL035X060MG |
| PL036X060MG |
| PL038X060MG |
| PL040X067MG |
| PL042X067MG |
| PL045X067MG |
| PL048X073MG |
| PL050X073MG |
| PL055X080MG |
| PL060X086MG |
| PL065X092MG |
| PL070X092MG |
| PL075X100MG |
