Shock Monitor TSM4000C1 Series
- For crushers, forward/reverse sequence built-in type.
- This type can detect overload on the crusher blade and output an automatic forward/reverse control signal when an overload occurs.
Features
- - Simply input a start (forward) signal to control stop, reverse, restart, etc. in the event of an overload without the need for an external sequence program.
- If normal operation does not return after the set number of reverse rotations has elapsed, a stop signal can be output to completely stop the device.
- - Overload level, stop time, and reverse time can be easily set and changed on site.
- -To save energy, it can automatically stop when there is no load.
Basic operation of TSM4000C1
Catalogs and Instruction Manuals
Product model number list
*Click on the model number to display detailed information.
| Standard body and current sensor |
Panel mounting type main body and current sensor |
Main unit only | Panel mounting bracket | Current Sensor | For sensors cable |
Doubler resistor | I/O cable |
|---|---|---|---|---|---|---|---|
| TSM4000-U010 | TSM4000P-U010 | TSM4000C1 | TSM4-PL1 | TSM-U010 | TSM4-S01
TSM4-S03 TSM4-S05 TSM4-S10 TSM4-S20 TSM4-S30 |
TSM4-PR1 | TSM4-C01
TSM4-C03 |
| TSM4000-U050 | TSM4000P-U050 | TSM-U050 | |||||
| TSM4000-U100 | TSM4000P-U100 | TSM-U100 | |||||
| TSM4000-U150 | TSM4000P-U150 | TSM-U150 | |||||
| TSM4000-U200 | TSM4000P-U200 | TSM-U200 | |||||
| TSM4000-M300 | TSM4000P-M300 | TSM-M300 | |||||
| TSM4000-M400 | TSM4000P-M400 | TSM-M400 | |||||
| TSM4000-M600 | TSM4000P-M600 | TSM-M600 | |||||
| TSM4000-M800 | TSM4000P-M800 | TSM-M800 |
