製品情報 プラブロックチェーン用アクセサリ
We have a wide lineup of conveyor peripheral parts such as dedicated sprockets, idlers, Plastic rail, set collars, chain guide parts, frame support parts, product guide parts, and bearing units.
- For Plastic block chain
- Chain guide parts
- Frame Support Parts
- Product Guide Parts
- Set Color
Bearing Unit
Please click on the images below to see how to use each accessory.
- Support head
- Side Top Bracket
- Connecting
joint - Threaded Tube End
- Support Base
- Universal Foot
Support Foot
Support head
-
・Application
Supports the conveyor frame from directly below.
Use to secure pipe frames.
Wiring inside the support head is also possible.
-
・Usage image
[Click to enlarge]
[Click to enlarge]
Side Top Bracket
-
・Application
Supports the conveyor frame from the side.
Suitable for attaching trays to the bottom of conveyors or for conveyors with simple structures.
-
・Usage image
[Click to enlarge]
[Click to enlarge]
Connecting Joint
-
・Application
The two legs are connected to stabilize the conveyor.
-
・Usage image
[Click to enlarge]
[Click to enlarge]
Threaded Tube End
-
・Application
Insert into a pipe, combine with a universal foot, and use as a leg for the conveyor frame.
-
・Usage image
[Click to enlarge]
Threaded tube end installation example
[Click to enlarge]
Support Base
-
・Application
Supports the base of the conveyor.
There are three types available: two-legged, three-legged, and two-legged + jointed, allowing you to choose the type that best suits your needs.
-
・Usage image
[Click to enlarge]
Support base installation example
[Click to enlarge]
Universal foot/support foot
-
・Application
Use as legs for conveyors and equipment.
It is ideal for places where slope and level adjustment are required, as well as for water conditions. The drilled hole type can also be fixed to the floor.
Note: The angle of the support foot cannot be adjusted.
-
・Usage image
[Click to enlarge]
Used for the legs of food processing machinery.
[Click to enlarge]
