Plastic top Chain TPS/TPS-P Type
- チェーンピッチ
38.1mm - For straight running
- With a larger allowable tension than the TTP type (approximately 1.4 times), it is ideal for conditions where more load is applied.
- The same sprockets can be used with the curved conveyor Plastic top chain (TTUP, TPU type).
Features
- - Larger allowable tension than the TTP type (approximately 1.4 times). Ideal for conditions where greater loads are applied.
- - The same sprockets as the curved conveyor Plastic top chain (TTUP, TPU type) can be used, allowing for common parts.
- · The TTP-P type (plastic pin type) is made entirely from engineering plastic resin, making it lightweight and easy to install and replace.
- Additionally, under water lubrication, it is expected to have a longer life than the stainless steel pin type.
■Applications
Below are the industries we recommend:
It may not be possible to use this product depending on the conveying capacity (conveyor speed), conveyed items (weight, shape), environment, application, etc.
Please use this as a guide when making your selection.
If you have any applications or conditions not listed, please contact us.
Recommended industry/carrying size (●: Recommended ○: Usable △: Varies depending on carrying conditions)
| Transport size (weight) |
Industry | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Can manufacturing | beverage | tire | Machine parts | logistics | Medicines | Bakery and Food | secondary battery | semiconductor· Solar panel related |
|
| large | ○ | ○ | △ | ○ | ○ | △ | △ | △ | △ |
| Medium | ● | ● | △ | ● | ● | ● | ● | ● | ● |
| Small | ● | ● | △ | ● | ● | ● | ● | ● | ● |
Purpose
- ■Conveying containers such as food, cans, and beverages
Product List
*Click on the format to display detailed information.
| Chain pitch mm | 38.1 | |
|---|---|---|
| Purpose | For straight running | |
| Chain Type | - | |
| - | ||
| Main body chain specifications | - | |
| Pin Type | Stainless steel pin type | Plastic pin type |
| Pin Material | SUS304 | Special engineering plastics |
| Pin Shape | D-pin | |
| Top plate thickness mm | 4.0 | |
| Pusher Material | - | |
| Other features | - | |
| Model | TPS | TPS-P |
|
 |
|
| Top plate width mm | 76.2, 82.6, 101.6, 114.3, 127.0 |
76.2, 82.6, 114.3 |
Note
1. As of January 2009, all knurled pin type joint pins have been changed to D-pin type.
2. Knurled pin and D-pin types cannot be connected. When replacing, please replace each chain individually.
