End fixture
- End bolts and connecting links used in hanging devices, etc.
- By attaching it to end RS roller chain, a reliable suspension device can be achieved.
- It has strength equal to or greater than that of RS roller chain, and is connected to the chain with appropriate clearance, allowing it to fully demonstrate the performance of RS roller chain.
| ※ | CAD data will be provided via a link to CADENAS Web2CAD Co., Ltd.'s CAD Drawing Library site "PARTcommunity." |
| ※ | For inquiries about CAD data and PARTcommunity, please contact Cadenas Web2CAD. Cadenas Web to CAD Co., Ltd. TEL: (03)5961‐5031 FAX: (03)5961‐5032 |
Catalogs and Instruction Manuals
End bolt (for RS roller chain)
Bolts used to secure the chain to the device.
Variety
[Click to enlarge]
| Model number | Applicable chain | L mm |
A mm |
B mm |
C mm |
M mm |
O mm |
D mm |
CW mm |
SW mm |
H mm |
Approximate Mass kg |
DXF Data 3D CAD Data |
標準価格 | Delivery |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RS40EB | RS40-1 | 61.0 | 41.5 | 38 | 6.0 | M8 | 4.00 | 15 | 11.2 | 13.0 | 6.5 | 0.04 | DXF・3DCAD | お問合せください | お問合せください |
| RS50EB | RS50-1 | 72.5 | 48.5 | 44 | 7.5 | M10 | 5.12 | 19 | 13.8 | 17.0 | 8.0 | 0.07 | DXF・3DCAD | お問合せください | お問合せください |
| RS60EB | RS60-1 | 89.1 | 60.0 | 55 | 9.1 | M12 | 5.99 | 21 | 17.8 | 19.0 | 10.0 | 0.12 | DXF・3DCAD | お問合せください | お問合せください |
| RS80EB | RS80-1 | 117.1 | 79.0 | 73 | 12.1 | M16 | 7.98 | 28 | 22.6 | 24.0 | 13.0 | 0.27 | DXF・3DCAD | お問合せください | お問合せください |
| RS100EB | RS100-1 | 145.1 | 98.0 | 91 | 15.1 | M20 | 9.58 | 34 | 27.5 | 30.0 | 16.0 | 0.51 | DXF・3DCAD | お問合せください | お問合せください |
| RS120EB | RS120-1 | 173.1 | 117.0 | 108 | 18.1 | M24 | 11.15 | 40 | 35.5 | 35.5 | 19.0 | 0.86 | DXF・3DCAD | お問合せください | お問合せください |
Note
1. The SW dimension is designed to fit the wrench 2-face width.
2. The nuts are made to the old JIS B1181 (Type 1), and the spring washers are made to JIS B1251.
3. 3. It has a black oxide finish.
End bolt dedicated connecting link (for RS roller chain)
Connect the end of the chain to the end bolt.
Variety
[Click to enlarge]
| Model number | Applicable chain | P mm |
H mm |
D mm |
T mm |
L1 mm |
L2 mm |
Approximate Mass kg |
DXF Data 3D CAD Data |
標準価格 | Delivery |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RS40EB-JL | RS40-1 | 12.70 | 12.0 | 3.97 | 2.0 | 8.8 | 10.2 | 0.01 | DXF・3DCAD | お問合せください | お問合せください |
| RS50EB-JL | RS50-1 | 15.875 | 15.0 | 5.09 | 2.4 | 10.7 | 12.3 | 0.02 | DXF・3DCAD | お問合せください | お問合せください |
| RS60EB-JL | RS60-1 | 19.05 | 18.1 | 5.96 | 3.2 | 13.95 | 16.05 | 0.04 | DXF・3DCAD | お問合せください | お問合せください |
| RS80EB-JL | RS80-1 | 25.40 | 24.0 | 7.94 | 4.0 | 17.45 | 20.05 | 0.09 | DXF・3DCAD | お問合せください | お問合せください |
| RS100EB-JL | RS100-1 | 31.75 | 28.6 | 9.54 | 4.8 | 20.95 | 23.65 | 0.156 | DXF・3DCAD | お問合せください | お問合せください |
| RS120EB-JL | RS120-1 | 38.10 | 34.4 | 11.11 | 5.6 | 26.05 | 29.55 | 0.264 | DXF・3DCAD | お問合せください | お問合せください |
Note
1. If there is a risk of side force being applied, use an F-type connecting link.
2. Please contact us for connecting links and end links with different shapes.
Precautions for handling
Please use either a Tsubaki RS roller chain or Super chain.
This product cannot be used with Lube-free Drive chain, RS-HT chain, Super-H chain, or Ultra Super chain.
Do not use M-type coupling links or offset links for RS roller chain.
When connecting Super chain and end bolts, always use an F-type coupling link.
- When installing the end bolts and RS roller chain, apply grease to the pin surface of the connecting link beforehand.
Also, please ensure that the chain is installed in a way that prevents twisting or other installation defects.
• Ensure that the end bolts are installed in a way that prevents bending loads from being applied.
Do not subject the threaded portion or head of the end bolt to impact or deform it.
For safety reasons, please disassemble, inspect, and lubricate the unit regularly.
