Product Info Synchronous Belts and Belt Sprockets
Tsubaki Synchronous Belts are rubber belts with teeth and are also known as toothed belts.
By meshing the teeth on the belt pulley (gear), rotation can be transmitted reliably without slipping, unlike flat belts and V-belts, which transmit power solely through friction.
By embedding glass fiber, aramid fiber, or carbon fiber core wires inside, they have high tensile strength and are used in applications that require accurate positioning and high synchronization.
table of contents
Synchronous Belts related information
-
Selection
-
Materials
-
Operation
Synchronous Belts Features
-
High precision operation is possible.
The meshing transmission allows for accurate operation, and there is almost no belt stretch during operation.
-
Low noise.
It allows for quieter and smoother operation than other transmission elements such as gears.
-
It's a clean transmission.
No lubrication is required.
-
High efficiency.
It can efficiently transmit power from motors and other devices, with almost no energy loss.
-
High speed operation is possible.
Compared to other transmission elements such as gears, it is possible to operate at high speeds.
Structure
Backing rubber
耐久性、耐摩耗性を向上させた、クロロプレンゴム(または高強度合成ゴム)により、
心線を保護し長寿命を可能にしました。core wire
伸びが極めて少ない高抗張力グラスファイバー(またはアラミド繊維)を使用し、
高精度伝動を可能にしました。Tooth rubber
背ゴムと一体成形された歯ゴムは、高負荷のかみ合い伝動を可能にしました。Tooth fabric
耐摩耗性および自己潤滑により、スムーズなかみ合いと低騒音を可能にしました。
dimple
Low noise due to the effect of special dimples on the tooth tips.
Just Touch Method
The just-touch method of engagement with the pulley, in which both the tooth tip and tooth root come into contact, enables high-precision transmission.
Synchronous Belts and Belt Sprockets lineup
Synchronous Belts and Belt Sprockets product list
Accessories
The sonic belt tension meter T-ACE, which uses an organic EL screen, and the belt clamp used for fixing workpieces to belts and attaching Open-ended belt are also included.
We have a wide selection of products.
Belt tension meter T- ACE
Model number BDTM201
Sonic belt tension meter for measuring belt installation tension
- - Bright, easy-to-read organic EL screen
- ・Up to 40 measurement conditions can be registered
- - A wide frequency range of 10 to 5000 Hz can be measured.
- ・Our Synchronous Belts unit mass is installed
Belt clamp
Model number BDCP-P□M□□
Used to secure workpieces to belts and attach Open-ended belt
- - Standard stock items: In stock and ready to ship, so they are available immediately.
- - Pre-drilled holes: The mounting holes are pre-drilled so you can use it immediately after purchase.
- - Products without drilled holes: Additional processing can be done according to the customer's installation method, increasing flexibility.
size
P5M、P8M
