Lock Belt Sprockets N Type
- Easy to fasten with just one nut
- Shaft hole diameters start from 7mm, making it ideal for fastening small shaft diameters.
Features
- *This product is made to order.
- * RoHS2 compliant (10 substances)
1. Fastening Principle
The inner diameter of Belt Sprockets and the outer diameter of the sleeve are tapered, and by tightening the clamping nut,
Belt Sprockets move by sliding on tapered surfaces.
At this time, a wedge action generates forces P and P' that press against the shaft and the inner surface of the tapered surface.
This P and P' force generates a frictional force that tightly fastens Belt Sprockets and shaft together.
*Click to enlarge the illustration
Catalogs and Instruction Manuals
Model number display example
| PT | 30 | P3M | 10 | BF | -A | - | N2 | 11 | A |
| ｜ Pulley |
｜ Pulley Number of teeth |
｜ Types (pitch) |
| Use belt width mm |
｜ Pulley Type (shape) |
| Material None: Carbon steel for machine structures *P5M only -A: Aluminum alloy *P3M only |
｜ sleeve Frame number |
｜ Shaft Hole Diameter mm |
| (BF type pulleys only) Mounting type A: Mounting on the opposite side of the hub B: Hub-side mounting |
Product model number list
Pulley type
| AF | BF Mounting position: A | BF Mounting position: B |
|---|---|---|
 |
 |
 |
*Click on the model number to display detailed information.
| Pitch mm |
Pulley format |
Material | Basic model number | Tooth number range | Belt width mm | ||
|---|---|---|---|---|---|---|---|
| 10 | 15 | 25 | |||||
| 2 | The C-type Lock Belt Sprockets supports a pitch of 2 mm. | ||||||
| 3 | BF | Aluminum alloy | P3M10BF-A-N□□□ | 36T～60T | ○ | ||
| P3M15BF-A-N□□□ | ○ | ||||||
| 5 | BF | carbon steel | P5M10BF-N□□ | 22T～72T | ○ | ||
| AF | P5M15AF-N□□ | ○ | |||||
| BF | P5M15BF-N□□ | ||||||
| AF | P5M25AF-N□□ | 26T～72T | ○ | ||||
| BF | P5M25BF-N□□ | ||||||
| 8 | The S-type Lock Belt Sprockets is compatible with a pitch of 8 mm. | ||||||
| 14 | The S-type Lock Belt Sprockets is compatible with a pitch of 14 mm. | ||||||
