Shock Monitor ​TSM4000M1 Series

製品写真
  • Contact detection type for machine tools
  • This type offsets the no-load operation state to 0% load automatically or via an external input, ensuring quick detection of minute load changes.

Features

  • - Automatically offsets power to 0% when there is no load, enabling highly accurate detection of minute changes in power when the tool comes into contact with the workpiece.
    (There are two outputs: OUT1 and OUT2.)
  • ・OUT3 is a non-offset value and can monitor absolute values.
  • - the detection level can be switched externally for up to eight types (OUT1, OUT2, OUT3 as a set), allowing for changes in grinding wheels and workpieces.

Basic operation of TSM4000M1

Basic operation of TSM4000M1

Catalogs and Instruction Manuals

Product model number list

*Click on the model number to display detailed information.


Standard body
and current sensor		 Panel mounting type main body
and current sensor		 Main unit only Panel mounting bracket Current Sensor For sensors
cable		 Doubler resistor I/O cable
TSM4000-U010 TSM4000P-U010 TSM4000M1 TSM4-PL1 TSM-U010 TSM4-S01
TSM4-S03
TSM4-S05
TSM4-S10
TSM4-S20
TSM4-S30 		TSM4-PR1 TSM4-C01
TSM4-C03
TSM4000-U050 TSM4000P-U050 TSM-U050
TSM4000-U100 TSM4000P-U100 TSM-U100
TSM4000-U150 TSM4000P-U150 TSM-U150
TSM4000-U200 TSM4000P-U200 TSM-U200
TSM4000-M300 TSM4000P-M300 TSM-M300
TSM4000-M400 TSM4000P-M400 TSM-M400
TSM4000-M600 TSM4000P-M600 TSM-M600
TSM4000-M800 TSM4000P-M800 TSM-M800
Back to top of this page