Super chain
- Approximately 40% higher allowable load than RS roller chain
- The three basic dimensions are the same as RS roller chain, but by reducing the amount of plate waist, Maximum allowable load has increased by approximately 40%.
- It is suitable for use under conditions that would cause fatigue failure in RS roller chain, and can be downsized by one size from RS roller chain.
- *3 basic dimensions = pitch, roller diameter, inner width of inner link
Features/Applications
-
-High transmission capacity and high shock absorption
It is possible to reduce the size by one size from RS roller chain. Fatigue strength is approximately 40% higher than RS roller chain.
Suitable for applications such as steel equipment, automobile manufacturing equipment, environmental equipment, and agricultural machinery.
Precautions
- - Since it is designed for powerful transmission at low and medium speeds, if you are using it at high speeds that are not listed in kW ratings table please select RS roller chain.
When selecting sprocket specifications
It is necessary to select a sprocket specification that corresponds to the customer's operating environment and chain specifications.
Please use TOUGH TOOTH sprockets with Super chain.
Standard steel (hardened tooth tip) can be used for both single strand and multiple strand.
Please see the chain and sprocket compatibility chart here.
Chain and sprocket compatibility table
Catalogs and Instruction Manuals
Product List
*Click to display detailed information.
*The table below includes related products. The model numbers of the products introduced on this page are colored.
