Drawing Library Large size conveyor chain
- General-purpose and powerful
- Environmental resistance
- Bearing Roller
Conveyor Chain - Cement Conveyance
- Steel Equipment
- Biomass
- Waste Disposal Facility
- Food Industry
- Water Treatment Plant
- Automotive
- Other special uses
- Applied Equipment
Accessories
Bearing Bush Chain
Model number RF□□□□□R-NB～
A conveyor chain for high-precision positioning.
- - A needle bearing is used between the pin and bushing to minimize wear and elongation.
- - Suitable for transport such as positioning and tactile operation.
- ・使用雰囲気温度：-20℃～60℃
size
RF03 tons to RF36 tons
For inch sizes,
please contact us
Attachment Type
A1, A2, A3, K1, K2, K3
Roller type
R Roller
Double Plus Conveyor Chain
Model number RF□□□□□VR～
This chain can transport and accumulate.
- During transportation, the friction between the large diameter roller and the small diameter roller causes them to rotate simultaneously, and the ratio of the roller diameters
The cargo speed is 2.3 times the chain speed. - - During accumulation, braking force acts on the large diameter roller, causing slippage between the large diameter roller and the small diameter roller, resulting in free flow.
- ・Cost reduction through energy saving:
The low coefficient of friction reduces the required power, allowing for smaller chain sizes and lower costs. - ・Long life:
Due to the large chain speed difference (1/2.3) and allowable roller load, it has more than twice the lifespan of a top roller chain. - ・Stable running:
The height from the rail to the transported goods is low, allowing for stable running.
size
RF03トン～RF17トン
Attachment Type
none
Roller type
VR Roller
*Special sprocket
It is necessary.
Outboard Roller Chains
Model number RF□□□□□S-□□-□LSR□□～
This chain is based on the S rollers of each conveyor chain specification and has outboard roller attached.
- - The sprocket meshes with the central S roller and travel is controlled by outboard roller, resulting in stable travel.
- - Conveyor chains can be manufactured to various specifications.
- ・Application example 1:
When attaching a special attachment to the plate. - ・Application example 2:
When it is difficult to support the load with the central S roller. - ・Application example 3:
When it is difficult to guide the return side of the chain. - ・Application example 4:
When using R roller type outboard roller with double speed and accumulation functions.
Chain specifications
Manufactured to various specifications.
size
RF03トン～RF36トン
RF430S～RF6205S
Attachment Type
Special attachments also available
We will produce it.
Roller type
S Roller
Top Roller Chains
Model number RF□□□□□S-□□-□LTR□～
A top roller is attached to the top of the chain mid-pitch, and this top roller directly transports the transported goods.
I will.
- - Top rollers can also be manufactured from engineering plastic or with bearing rollers.
- *Standard sprockets cannot be used.
A special sprocket is required, so please contact us. - ・Application example 1:
The chain operates continuously, and the conveyed items are accumulated or temporarily stopped at the stopper on the conveyor.
When you let it. - ・Application example 2:
When transport and stopping work are carried out simultaneously on the same chain.
Chain specifications
Manufactured to various specifications.
size
RF03 ton to RF17 ton
RF6205
Attachment Type
none
Roller type
S roller, R roller, F roller
