Drawing Library Clutch
BS Series
Model number BS~
This clutch is specifically designed to prevent reverse rotation of conveyors (for low speeds).
- -The BS series has a cam and roller structure.
- - Thorough dust prevention measures keep out dust.
- -High reliability due to the development and adoption of a dedicated cam.
- - Sizes BS30 to BS135 are pre-greased and Do not require lubrication.
- - A low-speed, idling type that can be attached to the final rotating shaft of a conveyor, pump, etc.
Shaft diameter range mm
Φ30～Φ450
Torque range N・m
294～686000
BSEU Series
Model No. BSEU～
Integral torque arm on the outer race
- ・Low-speed overrunning applications
- ・Fitted with high performance V-ring seals.
- ・Self- lubricating cam/roller mechanism for longer life.
- ・2GD Series is fitted with a lip seal and outer cover for enhanced dust and spray protection
Range of
Shaft Diameters mm
Φ20～Φ90
Torque range N・m
216～4700
MG-R series
Model number MG□□R～
This is a clutch to prevent reverse rotation of conveyors (for medium speeds).
- -MG series cam clutch is equipped with an oil reservoir for easy maintenance.
- - For medium speed idling, can be attached to the intermediate shaft of a reducer, etc.
Shaft diameter range mm
Φ19～Φ250
Torque range N・m
314～176000
BR & BR-P series
Model number BR~ BR□□P~
During high speed rotation, the cam does not come into contact with the inner or outer race, so a long life can be expected.
- - This is a high-speed idling cam clutch that can be expected to have a long life because the cam does not come into contact with the inner or outer race during high-speed rotation.
- - For high speed rotation, low speed engagement and reverse prevention.
- - The BR type is a type that is attached directly to the motor shaft.
- - The BR-P type has a built-in bearing, so it can be used as is.
Shaft diameter range mm
Φ20～Φ240
Torque range N・m
306～62034
BREU Series
Model No. BREU～
High speed centrifugal lift off Cam Clutch
- ・Longer service life can be expected as the cams do not contact the inner and outer races during high-speed rotating operations.
- ・Mainly used as backstop of inner race high-speed over running
- ・Available as a base model BREU,with an outer keyway BREU(K) or with a chain coupling attached BREU-C.
- ・Available with a range of different modular flanges
Range of
Shaft Diameters mm
Φ30～Φ150
Torque range N・m
607～33908
MA Series
Model number MA~
A cam that can withstand impact loads is used.
- - A cam with excellent impact load resistance is used, so it can firmly withstand impact loads.
- -This series was developed primarily to prevent the arms of pitching machines and tennis machines from vibrating.
- - No lubrication maintenance is required.
- All types in stock and ready for immediate delivery.
Shaft diameter range mm
Φ20～Φ30
Torque range N・m
176～510
BS-F Series
Model No. BS□□□F～
New design for tough environment, high torque, long life, compact and drop in structure
- ・Special double lip oil seal and multi temperature grease for wide temperature range
- ・Ingenious backstop mechanism
- ・The narrowest width with I-beam structure makes easy installation for customer's current layout
- ・Down sizing and High speed
Range of
Shaft Diameters mm
Φ60～Φ465
Torque range N・m
6760～980000
BR-HT Series
Model No. BR□□□HT～
BR-HT Cam Clutch is High Torque version of existing BR series.
- ・BR-HT Cam Clutch is High Torque version of existing BR series.
- ・Backstop applications for high-speed overrunning
- ・Greatly Increased Service Life
- ・Lift Off design, Non rollover design, Lower speed lift-off
- ・A more economical design
Range of
Shaft Diameters mm
Φ20～Φ320
Torque range N・m
105～366000
