Drawing Library Clutch
MZ Series
Model number MZ～
This type can be used for the widest range of applications.
- -This type can be used for a wide range of applications, from low speeds to high speeds.
- All types in stock and ready for immediate delivery.
- - Sprockets and other parts are attached using the inner circumference of outer race as the spigot.
- - Grease is already packed in. No lubrication maintenance is required.
- - Coupling type (MZ-C) is also available.
- -Can also be used for indexing and backstops.
Shaft diameter range mm
Φ15～Φ70
Torque range N・m
186～3040
MZEU Series
Model No. MZEU～
Available with a range of defferent modular flanges
- ・Prelubricated with a special grease and requires no lubrication maintenance
- ・Ideal for general applications
- ・Available as a base model MZEU,with an outer keyway MZEU(K) or with a chain coupling attached MZEU-C.
- ・Available with a range of different modular flanges
Range of
Shaft Diameters mm
Φ12～Φ150
Torque range N・m
60～33800
MZ-G Series
Model number MZ□□G～
This is the MZ series outer race peripheral grinding specification.
- - Sprockets and other parts are attached using the outer race periphery as a spigot.
- -Can be used for a wide range of applications, from low speeds to high speeds.
- All types in stock and ready for immediate delivery.
- - Grease is already packed in.
- - No lubrication maintenance is required.
- -Can also be used for indexing and backstops.
Shaft diameter range mm
Φ15～Φ70
Torque range N・m
186～3040
MG Series
Model number MG~
This is a representative overrunning model.
- - Compact and has high torque capacity.
- -Suitable for medium to low speed overrunning.
- - Excellent wear resistance during idling.
- - Coupling type (MG-C) is also available.
Shaft diameter range mm
Φ19～Φ250
Torque range N・m
314～176000
PB Series
Model number PB~
outer race is a sleeve, making it easy to mount sprockets, gears, pulleys, etc. with small outer diameters.
- - Gears, sprockets, pulleys, etc. with small outer diameters can be keyed to outer race.
- -Suitable for low to medium speed applications.
- - Oil-impregnated metal bearings are used.
- All types in stock and ready for immediate delivery.
Shaft diameter range mm
Φ10～Φ45
Torque range N・m
29.4～2110
200 Series
Model number B~
This type is attached directly to the shaft and has no inner race.
- -Can be compactly installed inside sprockets, gears, etc.
- -Suitable for low to medium speed applications.
- ・Custom inner race can be manufactured upon order.
Shaft diameter range mm
Φ25～Φ42
Torque range N・m
39.2～1400
LD Series
Model number LD~
This is an economy type that is easy to install and handle.
- -An economy type that is easy to install and handle.
- - Grease-filled type, no regreasing is required.
- All types in stock and ready for immediate delivery.
Shaft diameter range mm
Φ10～Φ30
Torque range N・m
5.88～49
ML Series
Model number ML～
Suitable for medium loads, easy to install, and enables compact design.
- - The cam and roller structure allows the rollers to act as bearings, making a compact design possible.
- - Grease is packed in. No lubrication maintenance is required.
- -We also have a selection of 2GD types with dust seals.
It has excellent dust resistance and can be used in dusty places. - - A retaining ring for the shaft is included when shipped.
- -Suitable for medium to low speed and medium load applications.
Shaft diameter range mm
Φ15mm～Φ80mm
Torque range N・m
70～2300
MR Series
Model number MR~
This is a cam clutch designed specifically for outer race slip.
- - When outer race is idling, the cam lifts off (floats up), eliminating contact with inner race, providing excellent resistance to idling wear.
- - Since it is designed for continuous high-speed outer race idling, the meshing rotation speed should be low.
Shaft diameter range mm
Φ85～Φ160
Torque range N・m
9500～33800
BB Series
Model number BB~
The bearing (6200 series) and cam clutch are integrated.
- - Compact design: Combines the functions of a one-way clutch and a bearing in a small space, allowing for effective use of space.
- Easy to install: Two types of installation onto the shaft or housing are available: press fit and key-fixed.
- - Increased torque capacity: By arranging multiple cams between the inner and outer races, it is possible to transmit larger torque than with a shell-type roller clutch.
- ・All types in stock: We also have a selection of products with oil seals, taking into consideration the environment in which they will be used.
Shaft diameter range mm
Φ15～Φ40
Torque range N・m
29～260
