Drawing Library Linipower Jack JWB Series
Screw Type
M: Trapezoidal Screw type.
B: Ball screw type.
H: High lead Ball screw type.
Basic capacity
This is the basic capacity that the jack body can handle.
Mounting Shape
U: This type has a screw shaft on the opposite side of the main body mounting base.
D: This type has a screw shaft protruding from the main body mounting base side.
Screw specifications
S: This is the basic form in which the screw shaft moves.
M: The basic form in which the screw shaft moves.
The screw shaft has an anti-rotation function.
R: The screw shaft rotates and the nut moves.
Worm reduction ratio
Reduction ratio of the worm reducer.
Please refer to the detailed information for the reduction ratio values of each model.
Stroke
travel distance of the threaded shaft or traveling nut.
Flange mounting direction
For traveling nut types, specify which side of the nut the mounting flange should be on.
U: Upper side
D: Lower side
Option symbol
J: It comes with bellows.
B: Comes with End fitting of the rod.
I: Equipped with I-type end fitting.
M: Comes with table-shaped End fitting.
C: Equipped with clevis.
Y: A limit switch with a mechanical counter.
K2: Two built-in microswitches detect the stroke position.
K4: Equipped with four built-in microswitches that detect the stroke position.
P: Equipped with a potentiometer that detects the stroke position.
R: Equipped with a rotary encoder that outputs a stroke movement signal.
E: Comes with a three-phase brake motor.
The power supply supports 200/200/220V 50/60/60Hz.
EV: Comes with a three-phase motor with brake.
The power supply supports 400/400/440V 50/60/60Hz.
G1: Equipped with a three-phase gear motor with brake, the reduction ratio is 1/5.
The power supply supports 200/200/220V 50/60/60Hz.
G2: Equipped with a three-phase gear motor with brake, the reduction ratio is 1/10.
The power supply supports 200/200/220V 50/60/60Hz.
