Drawing Library Croise Motor
series
CSMA, CSMR: Worm gear single reduction type.
HCMA, HCMR: Double Reduction type with helical gear and worm gear.
Motor Capacity
Indicates the motor capacity.
Frame No.
Indicates the size of the reducer.
It is automatically determined from the motor capacity and reduction ratio.
Installation symbol
Specify the installation direction.
(Here, frame numbers 28 and below are fixed to installation No. 0, and frame numbers 32 and above are fixed to installation No. 1.
For other symbols, please contact us.)
Mounting Type
H: The output shaft is hollow.
U: The output shaft is a solid type and is face mounted.
L: The output shaft is solid and is Foot mount mounted.
Reduction ratio
Indicates the reduction ratio.
The range division corresponds to the frame number.
Shaft arrangement
L: When viewed from the motor side, this type has a solid output shaft on the left side.
R: When viewed from the motor side, this type has a solid output shaft on the right side.
T: A type with a solid output shaft on both sides.
No symbol: If the mounting format is a hollow shaft type (H), the shaft arrangement symbol is not required.
Specification Code
No symbol: If there is no brake, no specification symbol is required.
B: Add when brake is installed.
BE: A rotary encoder is installed at the rear of the motor. A brake is included.
SR: Install an electrical overload protection device called a "Shock Relay."
Option symbol A
LG: Equipped with a mechanical overload protection device. Mounting surface is on the left side.
RG: Equipped with a mechanical overload protection device. Mounting surface is on the right side.
Z: This motor is compatible with inverter drive.
W: Suitable for outdoor installation.
J: Suitable for installation in locations subject to water.
V: The power supply voltage and frequency are 400/400/440V, 50/60/60Hz.
V1: The power supply voltage and frequency are 380V and 50Hz.
V2: The power supply voltage and frequency are 380V, 60Hz.
V3: The power supply voltage and frequency are 415V, 50Hz.
V4: The power supply voltage and frequency are 460V, 60Hz.
N: CE compliant.
N2: UL standard compliant specifications.
*N3: CCC specification.
H: Comes with an aluminum terminal box.
Q: Manual brake release available
M: Rotation can be controlled manually from the motor fan side.
Option symbol B (formerly: supplementary symbol)
・Terminal box position
Move the terminal box to a position where it has been rotated counterclockwise as viewed from the motor side.
P1: 90° offset P2: 180° offset P3: 270° offset
・Terminal box exit direction
Move the outlet to a position rotated clockwise as viewed from the terminal box.
・CSMA, HCMA motor capacity 0.75kW or less
D1: 90° offset D2: 180° offset D3: 270° offset
・CSMA, HCMA motor capacity 1.5kW or more
E1: 90° offset E2: 180° offset E3: 270° offset
・For CSMR and HCMR
F1: 90° offset F2: 180° offset F3: 270° offset
・Paint color
C0: Light gray C1: Light silver metallic
C2: Ivory White C3: Dark Silver Metallic
