Drawing Library Large size conveyor chain
- General-purpose and powerful
- Environmental resistance
- Bearing Roller
Conveyor Chain - Cement Conveyance
- Steel Equipment
- Biomass
- Waste Disposal Facility
- Food Industry
- Water Treatment Plant
- Automotive
- Other special uses
- Applied Equipment
Accessories
Large size conveyor chain DT Series
Model number RF□□□□□R･F･S･M･N-DT～
The most economical general-purpose conveyor chain (basic model).
- -We offer a lineup of metric pitch and inch pitch types.
- Various attachments are available.
- - The pins and bushings are heat treated, but the plates are not.
- ・Operating Ambient Temperature: -20℃ to 200℃
size
RF03トン～RF120トン
RF430～RF212
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller,
S roller, M roller
Large size conveyor chain DTA Series
Model number RF□□□□□R･F-DTA～
Improved wear resistance for general-purpose Large size conveyor chain DT Series (Advanced model).
- - Compared to DT Series, this specification improves wear resistance between the bushing and roller by three times.
- ・Only R rollers and F rollers are supported.
- ・Operating Ambient Temperature: -20℃ to 200℃
size
RF03 tons to RF36 tons
For inch sizes,
please contact us
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller
Large size conveyor chain AT Series
Model number RF□□□□□R･F･S･M･N-AT～
Compared to general-purpose conveyor chains (DT Series), it has approximately twice Maximum allowable load between the bushing and roller.
Improved wear resistance and roller allowable load (basic model).
- -We offer a lineup of metric pitch and inch pitch types.
- Various attachments are available.
- Ambient temperature: -20°C* to 400°C
*Please contact us regarding use below -20°C.
size
RF03トン～RF440トン
RF430～RF212
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller,
S roller, M roller,
N roller
Large size conveyor chain ATA Series
Model number RF□□□□□R･F-ATA～
This is a higher-end specification than AT Series. It has improved wear resistance and Maximum allowable load. (Advanced model)
- - Compared to AT Series, the wear resistance between the bush and roller is doubled, and the wear resistance between the pin and bush is 1.5 times greater.
Maximum allowable load has been increased by 1.2 times. - - Compatible with RF08 to RF36 sizes, R rollers and F rollers only.
- Ambient temperature: -20°C* to 200°C
*Please contact us regarding use below -20°C.
size
RF08 to RF36 tons
For inch sizes,
please contact us
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller
Large size conveyor chain CT Series
Model number RF□□□□□R･F･S･M･N-CT～
DT Series are equipped with wear countermeasures between the pin and bushing. (Specialized function product)
- - Improved wear resistance between pins and bushes for general-purpose Large size conveyor chain DT Series.
- Ambient temperature: -20°C* to 200°C
- *Please contact us for use below -20°C.
size
RF03トン～RF120トン
RF430～RF212
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller,
S roller, M roller
Large size conveyor chain BT Series
Model number RF□□□□□R･F･S･M･N-BT～
Maximum allowable load is approximately twice that of CT Series (specialized function product).
- -Maximum allowable load of Large size conveyor chain CT Series has been improved (approximately doubled).
- Ambient temperature: -20°C* to 200°C
- *Please contact us for use below -20°C.
size
RF03トン～RF120トン
RF430～RF212
Attachment Type
A1, A2, A3, K1, K2, K3, GA2, GA4, etc.
Roller type
R roller, F roller,
S roller, M roller
