Drawing Library Power Cylinder T Series
type
B: Wet-type slip clutch is built in as an overload protection device.
C: Equipped with Thrust detection limit switch.
Rated thrust
This is the rated thrust at which the motor can operate.
Nominal speed
This is the cylinder operating speed when the motor is rotating synchronously.
Please refer to the detailed information for the speed values of each model.
Nominal stroke
This is the stroke distance of the operating part. The manufacturing range varies depending on the thrust.
Motor Specifications
Z: Inverter drive compatible.
V: The power supply voltage and frequency are 400/400/440V, 50/60/60Hz.
V1: The power supply voltage and frequency are 380V and 50Hz.
V2: The power supply voltage and frequency are 380V, 60Hz.
V3: The power supply voltage and frequency are 415V, 50Hz.
V4: The power supply voltage and frequency are 460V, 60Hz.
T1: Heat resistance class F, resistant to 40°C.
T2: Heat resistance class F, 60°C.
T3: Heat resistance class F, 80°C.
T4: Heat resistance class H, 80°C resistant.
N: CE compliant.
N2: UL standard compliant specifications.
N3: CCC specification.
D: Pressure-resistant and explosion-proof.
A: It is an adapter without a motor.
Option symbol
L: Comes with two external stroke adjustment LSs.
L3: Comes with 3 external stroke adjustment LSs.
K2: Two built-in microswitches detect the stroke position.
K4: Equipped with four built-in microswitches that detect the stroke position.
P: Equipped with a potentiometer that detects the stroke position.
R: Equipped with a rotary encoder that outputs a stroke movement signal.
C: Equipped with clevis.
Cannot be installed simultaneously with position detection options K2, K4, P, and R.
I: Comes with I-shaped End fitting.
Models with a thrust of 58.8kN {6000kgf} or more
I-type End fitting are standard (no additional symbol required).
J: It comes with bellows.
F: The motor terminal box and stroke adjustment external LS are installed on the opposite side from the standard side.
This can be selected for models with a thrust of 39.2kN {4000kgf} or less.
