Drawing Library Servo Motor Reducer
Hypoid gearheads Helical gearheads (Click here for worm gearheads)
Type Name
HMTK: Right-angle shafttype using hypoid gears.
GMTK: A parallel shaft type that uses helical gears.
size
Indicates the rated input capacity.
Frame No.
This indicates the size of the reducer. For most models, this is the same value as the output shaft diameter.
It is automatically determined from the motor capacity and reduction ratio.
Mounting Type
L: Foot mount mounted type.
U: Face-mounted type.
F: Flange mounting type.
Face mount or flange mount?
It is automatically determined by the frame number.
Reduction ratio
Indicates the reduction ratio.
The range division corresponds to the frame number.
Shaft arrangement
For HMTK type
No symbol: If the mounting format is a hollow shaft type (H), the shaft arrangement symbol is not required.
S: When the mounting format is face mount (U), the solid output shaft protrudes toward the mounting surface.
T: A type with a solid output shaft on both sides.
For GMTK type
No symbol: No shaft arrangement symbol is required.
Mount Code
Specify the mount code that matches the motor you are installing.
Motor mount dimension diagram
0.2kW～2kW
Unit: mm
| size | Mount Code By motor manufacturer Compatibility list |
Motor mount dimensions | |||||||
|---|---|---|---|---|---|---|---|---|---|
| AD | MA | MB | MC | MD | ML(min) | MS | MT | ||
| HMTK0220H HMTK0222U |
E4DC | 50 | □60 | Φ50G7 | M5 depth 12 (PCD70) | 5 | 30(25) | Φ8 | M4 |
| E4HC | Φ14 | ||||||||
| HMTK0230H HMTK0228U GMTK02 |
E4DC | HMTK： 54 GMTK： 65 |
□60 | Φ50G7 | M5 depth 12 (PCD70) | 5 | 30(25) | Φ8 | M4 |
| E4EC | Φ9 | ||||||||
| E4HC | Φ14 | ||||||||
| G2HC | □80 | Φ70G7 | M6 depth 10 (PCD90) | ||||||
| HMTK04 GMTK04 |
E4HC | 54 | □60 | Φ50G7 | M5 depth 12 (PCD70) | 5 | 30(25) | Φ14 | M4 |
| G2HC | □80 | Φ70G7 | M6 depth 10 (PCD90) | ||||||
| HMTK07 GMTK07 |
G5KC | 63 | □80 | Φ70G7 | M6 depth 15 (PCD90) | 5 | 40(30) | Φ16 | M5 |
| G5LC | Φ19 | ||||||||
| K2KC | □130 | Φ110G7 | M8 depth 13 (PCD145) | Φ16 | |||||
| K2LC | Φ19 | ||||||||
| K3YC | 81 | M8 depth 16 (PCD145) | 8 | 58(40) | Φ24 | ||||
| HMTK15 GMTK15 |
K3LC | 77 | □130 | Φ110G7 | M8 depth 16 (PCD145) | 8 | 58(40) | Φ19 | M5 |
| K3MC | Φ22 | ||||||||
| K3YC | Φ24 | ||||||||
| HMTK22 GMTK22 |
L1PC | 121 | □180 | Φ114.3G7 | M12 depth 16 (PCD200) | 8 | 80(55) | Φ28 | M6 |
| L1RC | Φ35 | ||||||||
3.5kW, 5kW
