Drawing Library Sprocket and Pin gear drive
- Drive sprocket
- Sprockets for Small Size Conveyor Chains
- Sprockets for Large Size Conveyor Chains
- Pin gear drive
RS roller chains are best suited to RS sprockets.
You can choose from a wide range of products to suit your needs.
- *Steel type:
General-purpose type. Hardened tooth tip specifications are also available for improved wear resistance. - *Stainless steel type:
It is mainly used in combination with stainless steel chains.
Note: Please use surface treated sprockets for coated chains. - *Engineering plastic type:
Made of nylon resin, it can be operated without lubrication and is suitable for light load applications.
size
Steel Type:
RS15 to RS240
RF06B to RS16B
Stainless steel type:
RS11
RS25 to RS80
Engineering plastic type:
RS35 to RS60
Fit bore is a processed shaft hole product.
- - This sprocket has a machined shaft hole, keyway, and set screw.
No additional work is required by the customer and the product can be used immediately. - -there are three types: in-stock items, quick delivery items, and made-to-order items.
in-stock: Specify the processing content
short delivery time products/made-to-order products: Freely select from the set processing contents
size
Finished shaft hole: RS35 to RS100
Short delivery time/made to order products
single strand type: RS35 to RS240
RF06B～16B
2-row type: RS40 to RS120
RS08B～16B
SD type: RS40 to RS80
Stainless steel single strand type: RS35 to RS80
Fit bore BR type is a product with holes machined for mounting bearings.
- - Sprocket with drilled holes (bearings not included)
- No additional work is required when installing bearings.
size
Quoted on a case-by-case basis
single strand type B
RS35 to RS160
A sprocket integrated with a keyless fastener.
The friction of the tapered sleeve allows it to be fastened to the shaft without a key. Phase alignment is also easy.
- *S type: Strong fastening with bolts, compatible with a wide range of shaft diameters
- *N type: Easy to fasten with a nut, suitable for small diameter shafts
size
S-type:
RS35 to RS100
N-type:
RS35 to RS60
The hub bearing transmits stable rotation.
- -We have a wide range of varieties available.
It can also be used as an idler for the CT-TH type chain tensioner.- *Two types: ball bearing specification and oil-less bush specification
