Drawing Library Lift Master Ball screw Type
What type of screws are used?
Lifting load
This is the load that can be raised or lowered at the specified center of gravity.
speed
This symbol indicates the lifting speed.
Please refer to the detailed information for the speed values of each model.
Stroke
The distance that can be raised or lowered.
Drive unit
G: Comes with a three-phase motor.
K: It comes with a servo motor.
Option symbol
J: Bellows are attached to the opening.
L1 to L3: Add one to three position detection sensors.
V: This specifies the power supply voltage will be doubled.
E: A rotary encoder is attached to the rear of the motor.
D1 to D3: Change the motor mounting direction.
D1: 90° rotation from the standard position
D2: 180° rotation from the standard installation position
D3: 270° rotation from the standard mounting position
