Drawing Library Reducer

DCBL driver

Model number DCRD～

To the model number selection screen

This is a DCBL gear motor driver exclusively for Tsubaki.
It is equipped with speed control, position control, torque limit operation and various protection functions.

  • - By constantly monitoring the gear motor's operating status with the driver, various controls can be easily achieved.
  • - Supports multiple communication methods, making it easy to incorporate into existing equipment and remotely monitor operating status.
  • - The motor and driver have overheat protection and overload protection functions, allowing for quick shutdown in the event of an abnormality.
  • - The simple holding function can control the motor shaft so that it does not rotate when the motor is stopped.

DCBL Hypoid Motor

Model number DCHM～

To the model number selection screen

This DCBL Hypoid Motor has a hypoid gear head and an orthogonal right-angle shaft for compactness.
Brake-equipped models are also available as standard models. Equipped with communication functions, it allows for various controls.

  • - It has excellent speed control and is less susceptible to load fluctuations, achieving stable rotation speeds.
  • - Permanent magnets are used in the rotor, resulting in low loss and high efficiency (equivalent to IE4).
  • -Compared to induction motors, it is compact yet provides powerful output.
  • - The speed control range is wide at 1:25, allowing operation from low to high speeds.
size

0.2kW～0.75kW

Reduction ratio

0.2kW：1/10～1/60
0.4kW：1/10～1/50
0.75kW：1/10～1/50

* Please refer to here for a list of CAD data.