Drawing Library Mechanical protector
Shock Guard TGB Series
Model number TGB～
A versatile type with a wide range of products and applications
- - A wide range of sizes available, including small, medium and large, making it suitable for many applications.
- ・Color-coded springs allow different torque settings even for the same size
- ・Sprocket and coupling types also available
Set torque range
0.3～7150 N・m
Repeated operating torque accuracy
±10%
Backlash
Small
Shock Guard TGE Series
Model number TGE~
A type that allows for a wide range of torque settings with the same size
- - You can choose between Type 1, which can be fitted with small diameter sprockets and wide pulleys, and Type 3, which can be fitted directly with A-type sprockets and pulleys.
- ・Even with the same size, different torque settings can be used depending on the number of springs
Set torque range
1.0～700 N・m
Repeated operating torque accuracy
±5%
Backlash
Small
Shock Guard TGX Series
Model number TGX～
High-precision type with original ball-and-wedge mechanism
- ・No backlash and excellent rigidity under normal conditions
- ・Lost motion during tripping is extremely small
- ・Color-coded springs allow different torque settings even for the same size
- ・Coupling type and Power-Lock type are also available
Set torque range
1.5～784 N・m
Repeated operating torque accuracy
±5%
Backlash
None
Shock Guard TGF Series
Model number TGF~
Highly accurate return position type
- ・The output flange has high mounting surface precision, making it ideal for directly mounting an index table.
- ・Even with the same size, different torque settings can be used depending on the number of springs
- ・Available in combination with ECHT-FLEX couplings
Set torque range
6.0～4900 N・m
Repeated operating torque accuracy
±5%
Backlash
Extremely small
Shock Guard TGM Series
Model number TGM~
Sealed type with excellent environmental resistance
- - It is a sealed type with grease sealed inside, so torque accuracy is not affected by the intrusion of dust, oil, water, etc.
- - The cam follower and pocket are pressed together at two points of contact, so there is no backlash.
- ・Sprocket and coupling types also available
Set torque range
0.6～1060 N・m
Repeated operating torque accuracy
±5%
Backlash
None
Shock Guard TGK Series
Model number TGK~
Multifunctional type with air clutch function
- ・By adjusting the air pressure of the regulator, torque can be remotely controlled during operation.
- ・Can also be used as an ON-OFF clutch via remote control
- ・Available in combination with ECHT-FLEX couplings
Set torque range
15～392 N・m
Repeated operating torque accuracy
±5%
Backlash
Extremely small
Shock Guard TGH Series
Model number TGH~
This type can be attached to a high-speed rotating shaft such as a direct motor connection, and is also compatible with high torque.
- - Repeated operating torque accuracy is within ±5%
- ・After tripping due to overload, the rotation of the drive side is not transmitted to the driven side.
- ・Coupling type and pulley type can also be manufactured
Set torque range
32～5050 N・m
Repeated operating torque accuracy
±5%
Backlash
Small
Set torque range
2.4～451 N・m
Repeated operating torque accuracy
±10%
Backlash
Small
load
147～3430 N
Trip Load
±15%
Backlash
None
