Based on PX Belt tooth profile, this belt utilizes high-strength materials to achieve high load transmission, long lifespan, and compactness.

The reduction in installation tension is minimal, ensuring stable and highly accurate operation.

Improved wear resistance of tooth fabric reduces the scattering of Wear debris, enabling clean power transmission.

Lock Belt Sprockets is Belt Sprockets with an integrated keyless fastener.

Because it uses friction fastening, it achieves zero play in the fastening.

Phase alignment, installation, and removal are easy, and no axial locking mechanism is required.

You can choose from three types to suit your needs: the standard S-type, the N-type which can be fastened with a single nut, and the C-type which can be easily fastened with two bolts using a clamp collar.

This series achieves ISO Class 1 cleanliness by using a linkless structure that eliminates pins and pinholes, making it the cleanest series in Plastic Series open type.

Compared to the general-purpose TKP model, it contributes to reducing environmental impact through lower noise and dust generation.

We can accommodate special specifications, such as dry environment specifications (suitable for low humidity environments).

An EX version is also available that supports a maximum stroke of 5.94m.

We do not use any specific hazardous substances exceeding the thresholds restricted by the European RoHS II Directive. (Excluding the cables and tubes that are housed inside.)