It is expected to last for over 1 million strokes.

We recommend using a servo motor for control. For three-phase motor specifications, use the optional rotary encoder [option symbol: E].

For a constant load, the repeatability is ±1mm.

By installing a servo motor or a three-phase motor with a rotary encoder [option symbol: E], it becomes possible to control stopping at multiple points.

Interlocking operation is possible with either mechanical or electrical systems.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

In principle, pressing operations are not possible.
Depending on the application, special support may be possible.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

In principle, no support is required for standard models. However, support may be required depending on the operating conditions (acceleration/deceleration, OHL, etc.).

Self-locking is not possible with the standard specifications. It is possible to change the drive unit to a worm reducer that can be expected to have self-locking properties. Please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

There may be restrictions on the start-up frequency depending on the operating conditions and drive system, so please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

Interlocking operation is possible with either mechanical or electrical systems.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

If you wish to use the product in a manner other than the standard installation (lifting), special arrangements will be required. Please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

It can be adapted depending on the shape.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

It may be possible depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

We can accommodate special orders. However, please contact us as specifications will need to be considered depending on the servo motor manufacturer and model number.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

In addition to Zip Chain Lifter ZSL and Zip Master ZME, Tsubaki also offers Lift Master LME Ball screw type with an electric screw mechanism, with a servo motor as standard.

Yes, we can. Please contact us after filling out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions.

The standard product is equipped with four position detection sensors, but one additional sensor can be added as an option [option symbol: L1].
If you would like to add more sensors, please fill out the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

It is possible to change some parts (other than strength components) such as the cover to stainless steel.

Yes, we can. Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

As an option, a 400V motor voltage (option symbol: V) is available.

It cannot be retrofitted. When considering the product, please also consider whether or not you need bellows.

Yes, we can. Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and contact us.

This will vary depending on the conditions of use (temperature, operating frequency, load), so please contact us for details.

To meet the demand for low dust generation, we can provide 1) bellows attachment and 2) specified grease application. This varies depending on the cleanliness level, so please contact us for details.

It is not suitable for outdoor use. Please take measures such as providing a cover on your equipment.

Special support is available depending on the conditions of use.
Please fill in the "High-speed lifter Selection Request Form" or the technical sheet at the end of the catalog with your usage conditions and then contact us.

Heat-resistant specifications are not available.
However, we can accommodate bellows made from special materials, so please contact us.

It is not intended to be used in places where it may come into contact with water.
Please take measures such as installing a cover on your equipment.

Zip Chain does not have a locking mechanism. Be sure to use it within the specified stroke range.

Please request a non-applicable certificate through your point of purchase.

delivery will be the same.