Selection Guide Cable Carrier (CABLEVEYOR)
A wide selection
For clean rooms only
Cable System
For robots
Cable Carrier (CABLEVEYOR) +
Cables and hoses
Set delivery
Plastic Series
A wide range of easy-to-handle plastic Cable Carrier (CABLEVEYOR) are available in sizes from small to large.
Choose the most suitable Cable Carrier (CABLEVEYOR) Plastic Series for your application, such as the most popular and widely-varied TKP Series, the low noise and low dust TKR Series, or the TKZP Series with a zipper structure that allows for easy cable installation.
Steel Series
This steel Cable Carrier (CABLEVEYOR) is highly strong, rigid, and durable.
We have a wide range of products, including the TK type with supporter holes processed to match the cable diameter, the TKF type with a fully enclosed structure that protects the cable from dust and spatter, and the LS series that is lightweight and exhibits excellent dynamic functionality.
Special shapes such as stainless steel specifications and circular travel arrangement are also available.
Open type
This is a basic type with a wide range of sizes from small to large.
It is economical, can be delivery quickly, and is easy to cut and join.
| Inner Height | 10～80 |
|---|---|
| Inner width | 6～500 |
| bending radius | 18～500 |
Open type
This high-performance Cable Carrier (CABLEVEYOR) plastic series uses low-friction engineering plastic material to improve cable protection and enhance cleanliness.
The dimensions are the same as the TKP standard specifications, so it can accommodate a wide range of products.
| Inner Height | 10～32 |
|---|---|
| Inner width | 10～103 |
| bending radius | 18～200 |
Open type
Thanks to its short pitch and unique bending structure that utilizes the flexibility of the resin, there is no sliding wear between the pins and the pin holes, resulting in class-leading low noise and cleanliness (low dust generation).
It can cut and connect and spliced, and the length can be adjusted.
(Low noise level 40 dB(A), cleanliness level ISO Class 1)
| Inner Height | 22, 28, 40, 52 |
|---|---|
| Inner width | 20～200 |
| bending radius | 40～200 |
Open type
The short-pitch continuous link structure eliminates contact between the links, resulting in low noise and dust generation.
It is highly durable and runs smoothly even at high speeds.
This is a continuous link structure that is a complete departure from the conventional link structure.
| Inner Height | 28, 42, 58, 72 |
|---|---|
| Inner width | 36～378 |
| bending radius | 60～370 |
Open type
Simply fold it from the sheet state and close the zipper on the inner circumference to set the cable or hose.
The short pitch and linkless structure achieve low noise and low dust generation.
| Inner Height | 13 |
|---|---|
| Inner width | 10, 15 |
| bending radius | 50 |
Open type
The unique link structure makes it quiet during operation, lightweight, compact and easy to handle.
| Inner Height | 26, 38, 44 |
|---|---|
| Inner width | 25～250 |
| bending radius | 52～300 |
Open type
Multi-level partitions are possible for all sizes. Vertical dividers can be selected as single-sided fixed, double-sided fixed, or double-sided sliding.
This is a multi-functional Cable Carrier (CABLEVEYOR) that can accommodate special widths between 24 and 192 mm in 8 mm intervals.
| Inner Height | 28, 42, 58, 72 |
|---|---|
| Inner width | 24～503 |
| bending radius | 55～500 |
Open type
This series has the largest internal cross-sectional height of the link.
The width of the aluminum stays can be set in 1mm increments.
Highly rigid steel fittings are used, allowing for a variety of partitions.
| Inner Height | 108 |
|---|---|
| Inner width | 200～1000 |
| bending radius | 250, 300, 350, 400, 450, 500, 550 |
Closed type
The fully enclosed structure protects cables and hoses from dust and spatter.
Multi-level partitioning is possible.
| Inner Height | 26, 38.5, 54.5, 68.5 |
|---|---|
| Inner width | 56～306 |
| bending radius | 75～500 |
Closed type
The fully enclosed structure protects cables and hoses from dust and spatter.
Multi-level partitioning is possible.
| Inner Height | 54.5 |
|---|---|
| Inner width | 100～400 |
| bending radius | 140, 170, 200, 290, 380 |
Closed type
This series has the largest internal cross-sectional height of the link.
The width of the aluminum stays can be set in 1mm increments.
Highly rigid steel fittings are used, allowing for a variety of partitions.
| Inner Height | 105 |
|---|---|
| Inner width | 200～1000 |
| bending radius | 250, 300, 350, 400, 450, 500, 550 |
Open type
Simply fold it from the sheet state and close the zipper on the inner circumference to set the cable or hose.
The short pitch and linkless structure achieve low noise and low dust generation.
| Inner Height | 13 |
|---|---|
| Inner width | 10, 15 |
| bending radius | 50 |
Open type
It has a simple structure in which the opening/closing arm and link are integrated.
The hinged arm can be opened and closed quickly and easily, and the damper structure provides high strength and rigidity.
| Inner Height | 20 |
|---|---|
| Inner width | 25, 38 |
| bending radius | 28, 38, 48, 75, 100 |
Open type
The swivel arm structure integrated with the link allows for efficient storage of cables and hoses.
The structure that prevents the links from coming loose has achieved high strength and rigidity.
| Inner Height | 33, 46, 60 |
|---|---|
| Inner width | 50～400 |
| bending radius | 60～500 |
Closed type
The fully enclosed structure protects cables and hoses from dust and spatter, and is a highly strong and rigid Cable Carrier (CABLEVEYOR) Plastic Series.
| Inner Height | 30～80 |
|---|---|
| Inner width | 28～400 |
| bending radius | 67～500 |
Closed type
The fully enclosed structure protects cables and hoses from dust, spatter, etc.
The cover can be opened and closed easily and quickly from any position. The unique structure allows for unsupported length.
| Inner Height | 20.5, 26, 36, 46 |
|---|---|
| Inner width | 15～175 |
| bending radius | 55～300 |
Open type
Cable Carrier (CABLEVEYOR) can be used outdoors and is compatible with Long travel length and heavy loads.
It can handle travel length of up to 1500m.
| Inner Height | 58, 92 |
|---|---|
| Inner width | 100～800 |
| bending radius | 240～500 |
Open type
High strength and rigidity, and excellent heat resistance.
The support hole is machined to the optimum diameter for the cable/hose diameter, providing the best possible protection for the support.
| Inner Height | Order dimensions |
|---|---|
| Inner width | Order dimensions |
| bending radius | 75～700 |
Open type
High strength and rigidity.
A simplified type in which the supporter of the TK type has been changed to an aluminum bar. It is more economical than the TK type.
| Inner Height | 31, 46 |
|---|---|
| Inner width | 100, 150, 200 |
| bending radius | 75～300 |
Open type
High strength and rigidity, and excellent heat resistance.
Can be used with high loads and low frequency.
Special specifications such as stainless steel and circular travel arrangement are also available.
| Inner Height | Order dimensions |
|---|---|
| Inner width | Order dimensions |
| bending radius | 350, 450, 600, 750 |
Open type
Lightweight design provides excellent dynamic performance.
If the mass of the stored cable/hose is relatively small, it can also accommodate Long travel length.
| Inner Height | 58 (by supporter) |
|---|---|
| Inner width | Order dimensions |
| bending radius | 105～430 |
It can be used at high speed and high frequency.
Suitable for high frequency and Long travel length.
| Inner Height | Order dimensions |
|---|---|
| Inner width | Order dimensions |
| bending radius | 200, 250, 300, 400 |
It can be used at high speed and high frequency.
Suitable for high frequency and Long travel length.
| Inner Height | --- |
|---|---|
| Inner width | Order dimensions |
| bending radius | 175～500 |
CLEANVEYOR
Achieves the industry's lowest dust generation and cleanliness.
Furthermore, this is a cable system specifically for clean rooms that comes pre-assembled with dedicated Flexible cable and pneumatic tubes according to the customer's usage conditions.
This is the lowest-dusting Cable Carrier (CABLEVEYOR) system in the Tsubaki Cable Carrier (CABLEVEYOR) lineup.
Cleanliness ISO class 1 is achieved, making it ideal for use in clean rooms.
(CLEANVEYOR (certificate for the product CLEANVEYOR (CV-2025-0032)) obtained ISO Class 1 in the test based on ISO 14644-1 "Classification of air purity" by the Fraunhofer Institute for Industrial Engineering and Automation (IPA) in Germany)
- Low noise of less than 36dB(A) and a long life of over 10 million flexes (based on in-house testing).
• We do not use any specific hazardous substances exceeding the thresholds restricted by the European RoHS II Directive.
(Excluding cables and tubes supplied by the customer)
- Consultation with us is required to select and order this product.
FLATVEYOR
This is a unique self-standing flat cable system that makes full use of Cable Carrier (CABLEVEYOR) technology.
・Achieving cleanliness ISO Class 1 and contributing to yield improvement.
(In the test based on ISO 14644-1 "Classification of air purity" by the Fraunhofer Institute for Industrial Engineering and Automation (IPA) in Germany, FLATVEYOR (certificate for the product FLATVEYOR (FV-2025-0049)) has obtained ISO Class 1)
- It can accommodate Long travel length that cannot be achieved with flat cables.
• We do not use any specific hazardous substances exceeding the thresholds restricted by the European RoHS II Directive.
(Excluding cables and tubes supplied by the customer)
- Consultation with us is required to select and order this product.
FLATVEYOR ZP specifications
A self-standing flat cable system with an open/close structure.
- Tsubaki has developed its own unique open/close tube that is flexible, durable, and has good sliding properties.
Cables and tubes can be easily inserted and removed.
・Achieving cleanliness ISO Class 1 and contributing to yield improvement.
(In a test based on ISO 14644-1 "Classification of air purity" by the Fraunhofer Institute for Industrial Engineering and Automation (IPA) in Germany, the FLATVEYOR ZP specification (certificate for the product FLATVEYOR ZP Type (R130)) has obtained ISO Class 1)
- Up to 8 openable tubes are standardized.
• We do not use any specific hazardous substances that exceed the threshold limits set by the European RoHS II Directive.
(Excluding cables and tubes to be stored)
TKR Series
Thanks to Tsubaki's unique bending and flexing mechanism, Cable Carrier (CABLEVEYOR) is versatile and produces minimal dust.
- Achieves ISO Class 1 cleanliness, contributing to improved yield even in general-purpose applications.
(In tests based on ISO 14644-1 "Classification of Air Cleanliness" by the Fraunhofer Institute for Industrial Engineering and Automation (IPA) in Germany, the TKR type Cable Carrier (CABLEVEYOR) (certificate for the product TKR20H28) achieved ISO Class 1.)
- Special specifications such as dry environment specifications (suitable for low humidity environments) are available.
• We do not use any specific hazardous substances that exceed the threshold limits set by the European RoHS II Directive.
(Excluding cables and tubes to be stored)
・The TKR28H52-EX, with an even Long travel length, can be used up to 5.94m, and is now part of our lineup.
TOTALTRAX Tracks
The necessary cables and hoses are delivered pre-inserted (set) into Cable Carrier (CABLEVEYOR).
・All types of Cable Carrier (CABLEVEYOR) are available
- The cable is either our special Flexible cable for Cable Carrier (CABLEVEYOR), or a movable cable specified by the customer made by another manufacturer.
- Hoses and tubes will be provided as specified by the customer or equivalent items.
・We can also process end of cables and hoses (incorporating connectors, metal fittings, etc. specified by the customer or equivalent).
・Cables (manufactured by other companies), hoses, tubes and end parts specified by the customer can be procured by us or supplied by the customer.
3D Series
This Cable Carrier (CABLEVEYOR) can move freely in three-dimensional space.
Made of polyamide resin, it is lightweight and highly durable.
The connector and main body can be connected with one touch, and the connection is waterproof.
In addition to fixed piping, it can also move freely in three-dimensional space.
The connections between links and between links and end links are spherical and have a loose fit.
This sphere allows it to follow three-dimensional movements and twists (rotations).
bending radius (R100) is regulated at the link end face.
The steel wire allows for high tension.
The open structure allows the cable to be inserted by simply pushing it in, making maintenance easy.
Ideal for rotating robots.
