可動太陽光パネルの長尺ケーブルを確実に支持・保護し断線リスクを低減
ケーブルベヤ TKP形 ロングスパン仕様
overview
The cables that follow the movement of the solar panels were guided using a curtain rail system, but this made it difficult to limit the minimum bending radius of the cables, which made them prone to breakage.
The adoption of a long-span Cable Carrier (CABLEVEYOR) Gliding arrangement enables stable cable retention and significantly reduces the risk of cable breakage, contributing to reduced maintenance work and improved equipment reliability.
Problem
Water purification plants generally install covers for security purposes and to prevent the growth of algae, and in some cases solar panels are installed on these covers.
Previously, the cables that followed the movement of the solar panels were guided using a curtain rail system, but this made it impossible to limit the minimum bending radius of the cables, which made them prone to wear and breakage, and the burden of maintenance was an issue.
Furthermore, since the system would be installed at a water purification plant, it was necessary to use highly safe materials.
Adopted products
Cable Carrier (CABLEVEYOR) TKP type
A standard Cable Carrier (CABLEVEYOR) with a wide range of sizes from small to large.
We can accommodate a wide range of special specifications, including Gliding arrangement specifications.
Gliding arrangement specification is a system in which Cable Carrier (CABLEVEYOR) slides on guide channel when a longer stroke is required than the free span shown on Allowable load graph.
Benefits of adopting the product
The adoption of Cable Carrier (CABLEVEYOR) Gliding arrangement enables stable cable retention even over long distances, reducing the risk of cable breakage and maintenance work.
In addition, the use of special materials has helped to minimize health risks.
Tsubaki will do its utmost to support you in solving any problems you may have.
Please feel free to contact us with any concerns you may have.
Click here for details on the adopted products
Click here for consultation
Solution Case Study in the same industry
-
Special sprocket design proposals extend life and reduce replacement man-hours
ProblemReduced labor costs, longer lifeIndustryEnergyPurposeTransportproductSprocket -
The teeth can be replaced without removing the sprocket from the shaft, significantly reducing the number of man-hours required.
ProblemReduced man-hoursIndustryEnergyPurposeTransportproductSprocket -
Significantly reduce the man-hours required for ordering with our bulk jack system selection service
ProblemothersIndustryEnergyPurposeMove linearlyproductReducers, couplings, linear actuator
Solution Case Study for the same problem
-
Eliminated derailment and stoppages under dusty conditions. Stable operation with TKHP-R.
ProblemLong travel length, maintenanceIndustryPaper, cement, woodworkingPurposeSupport and guideproductCable Carrier (CABLEVEYOR) -
Achieves high lifting height, space saving, high speed and multi-point stopping, which were difficult with existing lifters
ProblemSpace-saving, Long travel length, high speed and high frequencyIndustrySteel and non-ferrous metalsPurposeMove linearlyproductHigh-speed lifter -
Electric lifter supports Long travel length of over 4m and high stopping accuracy
ProblemLong travel lengthIndustryLCD, semiconductor, electronic equipment, communicationsPurposeMove linearlyproductHigh-speed lifter -
Pit-less, Long travel length lifting and lowering
ProblemLong travel lengthIndustryAutomotive industryPurposeMove linearlyproductLinear Actuator