Setting conveyor chain transport conditions

• ・Machine used
• ・Conveyed items
• Corrosive
• - Wear resistance
• - Temperature of transported goods (room temperature, other ℃)
• - Dimensions of transported items
• - Amount of material to be transported (maximum kg/piece)
• - Transport volume (for bulk item: max. t/h)
• - Transport volume (for countable item: max. kg/side)
• ・ conveyor length (m)
• ・Lifting head (m)
• - Number of chain threads (threads, interval m)
• ・Chain speed (m/min)
• - Maximum tension Tmax (kN{kgf})
• ・Chain pitch (mm)
• ・Attachment (attached to each link)
• -Transportation method (direct, scraping, pushing with a dog, etc.)
• ・Operating hours (h/d)
• - Operation method (continuous, intermittent, with or without reverse)
• ・Lubrication (possible/not possible)
• ・Motor used (kW, r/min)
• ・Number of sprocket teeth (NT, PCD mm)
• ・Sprocket shaft hole diameter (Φ H8)
• ・Hub (Type B/C, Φ×L)
• ・Keyway (required/not required, tolerance Js9/E9, parallel/gradient, keyway width x keyway depth)
• - Tooth finishing (precise fusion cutting, machine cutting, high-frequency hardening)

• 1. We recommend using standard chains in terms of cost and delivery time.
• 2. If you cannot choose between standard chains and dedicated chains, a special chain with special specifications for materials or attachments will be used. Please also refer to the conveyor chain classification and conveyor type sections.