technical data Large size conveyor chain ChainsConveyor Chain Product Lineup and Features
Conveyor chains are available with the optimum chain specifications for each application, based on a combination of component materials.
Typical examples include the "Strong Conveyor Chain," which is suitable for lines that transport heavy objects or highly abrasive objects, and the "High-Power Conveyor Chain," which is suitable for lines that operate in corrosive environments or high-temperature/low-temperature environments.
We offer a wide range of "environment-resistant conveyor chains."
Below are the product lineups and features for "Heavy Duty Conveyor Chain" and "Environment-Resistant Conveyor Chain."
Heavy-duty conveyor chain
*Please check the product page for the strength of each specification.
ATA Series
Compared to AT Series, the wear resistance between the pin and bush is 1.5 times, the wear resistance between the bush and roller is 2 times, and Maximum allowable load is 1.2 times
CT Series
Improved wear resistance between pin and bush compared to DTA Series
Increased Maximum allowable load
BT Series
Improved tensile strength. For highly abrasive applications such as cement.
Improved wear resistance between bushings and rollers
Increased Maximum allowable load
Improved wear resistance between pins and bushings
DTA Series
Compared to DT Series, the wear resistance between the bush and roller is three times greater, and the roller allowable load is improved.
Increased Maximum allowable load
AT Series
Approximately twice Maximum allowable load of DT Series. Wear resistance between bushing and roller, and plate.
Improved wear resistance of pins, bushes and rollers
Increased Maximum allowable load
Improved wear resistance between bushings and rollers
Improved roller load capacity
DT Series
The most versatile chain
Environment-resistant conveyor chain
*Please check the product page for the strength of each specification.
SS Series
Made of 300 series stainless steel, it is resistant to corrosion, heat, chemicals, and cold.
Improved wear resistance between bushings and rollers
Improved roller load capacity
SSA Series
Wear resistance between bushing and roller is 1.5 times greater than that of SS Series
Improved corrosion resistance
GS Series
400 series stainless steel is used for pins, bushings, rollers, and plates to improve corrosion resistance
Improved wear resistance of pins, bushes and rollers
Improved roller load capacity
Increased Maximum allowable load
GSA Series
Compared to GS Series, the wear resistance between the pin and bush is 1.5 times, the wear resistance between the bush and roller is 2 times, and Maximum allowable load is 1.3 times
Improved corrosion resistance and heat resistance
RT specifications
The pins, bushings and rollers are made of 400 series stainless steel for improved corrosion resistance. The plates are made of carbon steel.
Improved tensile strength
YT specifications
400 series stainless steel is used for pins, bushings and rollers to improve corrosion resistance. Plates are alloy steel.
Improved corrosion resistance
MT Series
400 series stainless steel is used for the pins and bushes, improving wear resistance between the pins and bushes
Improved tensile strength
VT Series
The pins and bushings are made of 400 series stainless steel for improved corrosion resistance. The plates are made of alloy steel.
You can choose the product that best suits your needs from the "Selection Guide."
