technical data Reducer Worm Reducer Handling

This page describes general matters regarding the handling of the EWJ, EWJM(R), EW, EWM(R), SWJ, SWJM(R), SW, SWM(R), and TD series.

For details, please refer to Instruction Manuals attached to the product.

3. Transportation

When transporting the reducer, be sure to use the eye nuts on the top of the case (fixed with hex bolts in the drilled holes), and never hang wires or the like on the input and output shafts. Unexpected loads will be applied to the shafts and bearings, which may shorten the reducer's lifespan or cause it to malfunction.

If a motor is attached, please use the motor's hanging hook and pay attention to the balance.