technical data GearMiter Bevel GearboxTechnical technical data
4. Cross shaft allowable torque
This is the allowable torsional transmission capacity of the cross shaft only (allowable torque of the cross shaft).
In the case of a line shaft drive, it is necessary to check the torque applied to the cross shaft (see Selection Example 2).
| ED | 2 | 4 | 6 | 7 | 8 | 10 | 12 | 16 | 20 | 25 |
|---|---|---|---|---|---|---|---|---|---|---|
| Allowable torque for cross shaft only | 32.0 | 66.0 | 152 | 320 | 627 | 891 | 1225 | 2116 | 3626 | 6017 |
Note: By using a special material for the shaft, the allowable torque can be improved (see catalog).
