sizing Servo motor reducer TERVO
Enter the selection criteria
Selection criteria
Motor manufacturers |
||||||
Motor model |
||||||
Reduction ratio |
||||||
Reducer Type |
||||||
Mounting Type |
|
|
||||
Mounting Type |
|
|
||||
Mounting Type |
|
|
||||
Shaft arrangement |
|
|
|
|||
|
|
|
||||
|
|
|
||||
Shaft arrangement |
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
Shaft arrangement |
||||||
Motor Specifications
capacity |
kW | ||
Rated Torque |
Nm | ||
Maximum torque |
Nm | ||
Rated Speed |
r/min | ||
Maximum Rotation Speed |
r/min | ||
Mount Code |
*Please select the motor manufacturer.
*Please select the motor model.
*Please select the reduction ratio.
*Please select the reducer type.
*Please select the mounting format.
*Please select the shaft arrangement.
Selection results
Reducer specifications
| Model number | Actual reduction ratio | Rated Input kW |
Output shaft rated torque N・m |
Backlash minutes |
Input shaft moment of inertia x10-4 kg m 2 |
Price | Delivery | ||
|---|---|---|---|---|---|---|---|---|---|
| Input rotation speed r/min | |||||||||
| 3000 | 2000 | 1500 | |||||||
|
|||||||||
・Backlash is an approximate value and is not a guaranteed value.
・The moment of inertia is converted into the input shaft (motor shaft) and is the value for the gearhead alone.
・The moment of inertia is converted into the input shaft (motor shaft) and is the value for the gearhead alone.
- The maximum input rotation speed is 3000 r/min.
Please contact us for rated inputs with input rotation speeds of less than 1500 r/min.
Please contact us for rated inputs with input rotation speeds of less than 1500 r/min.
- The maximum input rotation speed is 3000 r/min.
Please contact us for rated inputs with input rotation speeds of less than 1500 r/min.
Please contact us for rated inputs with input rotation speeds of less than 1500 r/min.
Reducer specifications
| Model number | size | Actual reduction ratio | Output shaft rated torque N・m |
Input Power kW |
Backlash minutes |
Input shaft moment of inertia x10-4 kg m 2 |
Price | Delivery | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Input rotation speed r/min | Input rotation speed r/min | |||||||||||
| 3000 | 2000 | 1500 | 3000 | 2000 | 1500 | |||||||
|
||||||||||||
・Backlash is an approximate value and is not a guaranteed value.
・The moment of inertia is converted into the input shaft (motor shaft) and is the value for the gearhead alone.
・The moment of inertia is converted into the input shaft (motor shaft) and is the value for the gearhead alone.
・The allowable output shaft torque for SWJMK70~, SWMK80~, and SWMK100~ is the value for intermittent operation.
Please use with an operating time rate (ED rate) of 50% and continuous operation of 20 minutes or less.
For continuous operation, the thermal rating capacity must be taken into consideration. Please contact us.
Please use with an operating time rate (ED rate) of 50% and continuous operation of 20 minutes or less.
For continuous operation, the thermal rating capacity must be taken into consideration. Please contact us.
・The allowable output shaft torque for EWJMK50~, EWJMK63~, EWJMK70~, EWMK80~, and EWMK100~ is the value for intermittent operation.
Please use with an operating time rate (ED rate) of 50% and continuous operation of 20 minutes or less.
For continuous operation, the thermal rating capacity must be taken into consideration. Please contact us.
Please use with an operating time rate (ED rate) of 50% and continuous operation of 20 minutes or less.
For continuous operation, the thermal rating capacity must be taken into consideration. Please contact us.
- In the case of intermittent operation, it is necessary to check whether the motor can accelerate with the starting torque when starting.
For the efficiency at startup, use half the value that can be calculated from the allowable input kW and allowable output shaft torque.
For the efficiency at startup, use half the value that can be calculated from the allowable input kW and allowable output shaft torque.
*Depending on the mounting cord used, the torque may exceed the allowable torque of the coupling connecting the servo motor and the reduction unit.
Please contact us for more details.
Please contact us for more details.
