technical data High-speed lifter Lift Master Position Detection Sensor Specifications
Position detection sensor specifications
| Model | EE-SX972-C1(OMRON) |
|---|---|
| Power supply voltage | DC 5 to 24 V ±10% Ripple (pp) 10% or less |
| Control Output | NPN open collector (load current 50mA or less) |
| Operation Mode | OUT1: ON when light is received OUT2: ON when light is blocked |
| Electrical Circuit |
[クリックで拡大] |
For output specifications, PNP open collector type is also available as a special order, so please contact us for details.
When operating Lift Master in tandem (motor synchronization)
To start, turn on the power to all units at the same time, and to stop, use the position detection sensor attached to each Lift Master.
Avoid controlling all units with one position detection sensor as this will result in cumulative stroke errors.
Adding a position detection sensor is available as an option. For details, see the "Adding a position detection sensor (Ball screw type / Trapezoidal Screw type)" section.
