*The contact area between the hub and spider is coated with grease specifically for resin. Do not wipe off the grease; continue using it as is. If you wipe off the grease before using the spider, it may wear out prematurely.
*The clamp bolt is pre-greased. Do not wipe off the grease. If you use the product after wiping off the grease, the shaft fastening torque may fall below the standard value.
Taper lock fastening
*The contact area between the hub and spider is coated with grease specifically for resin. Do not wipe off the grease; continue using it as is. If you wipe off the grease before using the spider, it may wear out prematurely.
*Grease is applied to the contact area between the hub and the tapered surface of the pressure ring. Use the product as is without wiping off the grease. If you use the product after wiping off the grease, the shaft fastening torque may fall below the standard value.
*The pressure bolts used have undergone a special surface treatment. Do not use any pressure bolts other than those provided. If you use bolts other than those provided, the shaft tightening torque may fall below the standard value.
