Protecting cleanroom cables, reducing dust generation and improving yield
For semiconductor and FPD manufacturing and inspection equipment used in clean rooms, it is important to suppress dust generation that can lead to workpiece defects.
CLEANVEYOR 's low dust generation, ISO clean class 1 rating, cleanly supports and guides Flexible cable above the workpiece, contributing to improved yield.
| Problem | Industry | Purpose | Product group |
|---|---|---|---|
| Wear debris and dust generation | LCD, semiconductor, electronic equipment, communications | Support and guide | Cable Carrier (CABLEVEYOR) |
Problem
When the moving parts of the cable protection device are located above the workpiece in semiconductor and FPD manufacturing and inspection equipment, dust can be generated, causing problems with the workpiece.
Adopted products
Cable Carrier (CABLEVEYOR) CLEANVEYOR
This is the lowest dust-generating cable system among Tsubaki Cable Carrier (CABLEVEYOR).
It achieves ISO Class 1 cleanliness and is ideal for use in clean rooms.
It has low noise of less than 36dB(A) and a long life of over 10 million flexes (based on our test results).
RoHS compliant (excluding customer-supplied cables and tubes).
Benefits of adopting the product
CLEANVEYOR, which is integrated into a pod made of fluororesin material, has achieved low dust generation, leading to improved yields.
In addition, it has acquired ISO Clean Class 1 certification, which has contributed to improving the reliability of the equipment in clean rooms.
Tsubaki will do its utmost to support you in solving any problems you may have.
Please feel free to contact us with any concerns you may have.
Click here for details on the adopted products
Click here for consultation