Cable Carrier (CABLEVEYOR) Product List (Plastic Series)

Open all Close all
variety size
Inner Height
mm
Inner width
mm
bending radius
mm
Pitch
mm
Maximum travel
length
m
cable
·hose
Maximum outer diameter
mm
Note) 1
cable
·hose
maximum mass
kg/m
Gliding
arrangement
specification
Circular travel arrangement		 arm
Opening and closing structure		 Partition
　TKP形　(プラシリーズ　オープン形) 1.0～8.8 4～72 0.4～60
TKP Series
 TKP13H10 10 6 20 13 1.0 4 0.4 --- ● ---
28, 37 1.3
15 20 1.0 8
28, 37 1.3
10, 20 18 1.0
28, 37 1.3
10, 15, 20 20 1.0
28, 37 1.3
TKP17H11 11 10 17 17 1.2 7 0.4 --- --- ---
TKP18H14 14 15, 40 28 18 1.5 12 1 --- ● ---
37, 50 1.75
TKP18H15 15 20, 30 28 18 1.5 13 1 --- ● ---
37, 50 1.75
15, 20, 30, 40 28 1.5
37, 50 1.75
TKP25H15 15 15, 20 28 25 1.5 13 1 --- ● ---
37, 50 1.75
30 28 1.5
37, 50 1.75
TKP35H22 22 13 37, 50 35 2.3 11 2 ● ●
75, 100 2.7
25 37, 50 2.3 20
75, 100 2.7
38, 50, 63 37, 50 2.3 20
75, 100 2.7
TKP35H32 32 16 48, 60 35 2.0 14 2 --- --- ---
75, 100, 125 2.3
25 48, 60 2.0 22
75, 100, 125 2.3
38, 50 48, 60 2.0 29
75, 100, 125 2.3
TKP45H25 25 38, 58, 78, 103 50 45 2.8 22 4 ● ●
75, 95 3.2
125, 150, 200 3.3
TKP58H39 39 50, 75, 100, 125 60 58 3.9 35 8 ● ●
75, 90, 125,
150, 200		 4.3
TKP62H34 34 150, 200 75, 90, 125,
150, 200		 62.5 4.4 30 12 ● ●
TKP68H46 46 75, 100, 125,
150, 175		 75, 100, 125,
150, 200, 250		 68 4.8 41 12 ● ●
TKP90H50 50 100, 150, 200 130, 200,
250, 300		 90 5.2 45 18 ● ●
TKP91H56 56 150, 175, 200,
225, 250, 275,
300, 325, 350,
400, 450, 500		 150, 200, 250,
300, 350, 400		 91 6.8 50 50 ● ●
TKP91H80 80 150, 175, 200,
225, 250, 275,
300, 325, 350,
400, 450, 500		 150, 200, 250,
300, 350, 400,
450, 500		 91 8.8 72 60 ● ●
TKP125H74 74 150, 250, 350 185, 250,
350, 450		 125 7.2 67 45 ● ●
　TKP形MW仕様　(プラシリーズ　オープン形) 0.8～2.6 8～22 0.4～4.5
TKP type
MW specification
 TKP13H10xxM 10 10, 20 18 13 0.8 8 0.4 --- ● ---
28, 37 1.0
TKP18H14xxM 14 15, 40 28 18 1.2 12 1 --- ● ---
37, 50 1.4
TKP25H15xxM 15 15, 20 28 25 1.2 13 1 --- ● ---
37, 50 1.4
30 28 1.2
37, 50 1.4
TKP35H22xxM 22 13 37, 50 35 1.8 11 2 --- ●
75, 100 2.2
25 37, 50 1.8 20 2
75, 100 2.2
38, 50, 63 37, 50 1.8
75, 100 2.2
TKP35H32xxM 32 16 60 35 1.6 14 2 --- ● ---
75, 100, 125 1.8
TKP45H25xxM 25 38, 58, 78, 103 50 45 2.3 22 4.5 --- ●
75, 95 2.5
125, 150, 200 2.6
　TKUA形　(プラシリーズ　オープン形) 4.3～6.4 22～39 4～10
TKUA Series
 TKUA45H26 26 25 52, 65, 95, 125,
150, 180, 200		 45.5 3.9 22 4 Note) 5 Note) 5
38, 58, 78, 103 23
TKUA55H38 38 50, 75, 100,
125, 150		 63, 80, 100,
125, 160, 200		 55.5 5.2 34 7 Note) 5 Note) 5
TKUA66H44 44 50, 75, 100,
125, 150, 175,
200, 225, 250		 75, 100, 120,
140, 200,
250, 300		 66.5 6.2 40 10 Note) 5 Note) 5
　TKMK形　(プラシリーズ　オープン形) 2.4～9.3 21～65 3～50
TKMK Series
 TKMK47H28 28 24 55, 75, 100,
160, 200, 250		 47.5 2.4 21 3 ● ---
56, 104, 152, 192
Note) 3		 25
TKMK65H42 42 66, 106, 154,
194, 258
Note) 3		 75, 95, 115,
145, 220, 300		 65 4.4 38 20 ● ---
TKMK95H58 58 114, 162, 210,
258, 306, 402, 514
Note) 4		 140, 170, 200,
290, 380		 95 7.3 52 30 ● ---
TKMK125H72 72 151, 247, 359,
407, 455, 503
Note) 4		 180, 220, 260,
340, 380, 500		 125 9.3 65 50 ● ---
　TKQ形　(プラシリーズ　オープン形) 2.3～4.6 23～60 3～12
TKQ Series
 TKQ15H28 28 36, 60, 76, 108
Note) 3		 60, 75, 90,
110, 150		 15 2.3 25 3 --- ---
TKQ20H42 42 84, 124, 172
Note) 3		 100, 150,
190, 250		 20 3.3 38 5 --- ---
TKQ25H58 58 122, 170, 218, 266
Note) 4		 170, 200,
250, 320		 25 4.2 52 8 --- ---
TKQ30H72 72 170, 266, 378
Note) 4		 180, 250,
300, 370		 30 4.6 65 12 --- ---
　TKR形　(プラシリーズ　オープン形) 1.77～4.94 18～46 2～10
TKR Series
 TKR15H22 22 20 40, 50, 75 15 1.77 18 2 --- ---
40, 60 20
TKR20H28 28 30, 40, 50, 60,
80, 100, 120		 55 20 2.46 25 2.4 --- ---
TKR20H28 28 30, 40, 50, 60,
80, 100, 120		 75, 95, 150 20 2.76 25 2.4 --- ---
TKR26H40 40 50, 62, 75, 87,
100, 125, 150, 200		 75, 100,
125, 150		 26 3.95 36 8 --- ---
TKR28H52 52 50 75, 100,
150, 200		 28 4.94 45 10 --- ---
62, 75, 87,
100, 125, 150, 200		 47
TKR28H52-EX 52 50 75, 100,
150, 200		 28 5.94 45 10 --- ---
62, 75, 87,
100, 125, 150, 200		 47
TKR37H28 28 40, 50, 60, 70, 80 55, 75, 100 37 2.65 25 2.4 --- ---
　TKZP形　(プラシリーズ　オープン形) 1.0 6 0.1～0.2
TKZP Series
 TKZP10H13 13 10, 15 Minimum bending radius 50 10 1.0 6 0.1 --- --- --- ---
20, 25 0.2
　TKQT形　(プラシリーズ　オープン形) 2.1 18 2
TKQT Series
 TKQT32H20 20 25, 38 28, 38, 48,
75, 100		 32 2.1 18 2 --- ---
　TKET形　(プラシリーズ　オープン形) 2.1 16 2
TKET Series
 TKET32H18 18 25, 38 28, 38, 48,
75, 100		 32 2.1 16 2 --- ---
　TKXC形　(プラシリーズ　オープン形) 10.6 98 65
TKXC Series
 TKXC165H108 108 200～1000 250 165 10.6 98 65 ● ---
　TKC形　(プラシリーズ　クローズ形) 2.7～8.8 22～72 2～60
TKC Series
 TKC28H30 30 28 67, 100, 125 28 2.7 25 2 --- --- ---
48 27
TKC34H25 25 50, 90, 130 70, 100, 150 34 3.3 22 12 ● ●
TKC47H36 36 80, 160 100, 150,
200, 250		 47 4.3 32 17 ● ---
TKC64H50 50 110, 220 135, 200,
250, 300		 64 5.8 45 25 ● ---
TKC85H68 68 150, 200, 300, 350 180, 250, 350 85 7.8 61 60 ● ---
TKC91H56 56 150, 200, 250,
300, 350, 400		 200, 250, 300,
350, 400		 91 6.8 50 50 ● ---
TKC91H80 80 150, 200, 250,
300, 350, 400		 200, 250, 300,
350, 400,
450, 500		 91 8.8 72 60 ● ---
　TKA形　(プラシリーズ　クローズ形) 3.3～6.3 13～40 2～10
TKA Series
 TKA30H20 20.5 15 55 30.5 2.5 13 2 Note) 5 ---
75, 95, 125,
145, 180		 2.7
20, 25, 38, 50, 65 55 2.5 18
75, 95, 125,
145, 180		 2.7
TKA38H26 26 25, 38, 58, 78,
103, 130		 70 38.5 2.7 22 4 --- ---
95, 120, 145,
170, 195, 230		 3.1
TKA45H36 36 50, 75, 100,
125, 150		 82 45.5 3.9 32 6 --- ---
95, 125, 145,
170, 200, 230		 4.3
TKA55H45 45 50, 75, 100,
125, 150, 175		 100, 120, 140,
170, 195, 225,
250, 300		 55.5 5.4 40 10 --- ---
　TKMT形　(プラシリーズ　クローズ形) 2.4～9.3 23～61 3～50
TKMT Series
 TKMT47H26 26 56, 80, 104,
152, 192		 75, 100, 160,
200, 250		 47.5 2.4 23 3 ● ---
TKMT65H38 38.5 66, 106, 130,
194, 258		 95, 115, 145,
220, 300		 65 4.4 34 20 ● ---
TKMT95H54 54.5 114, 130, 162,
258, 306		 140, 170, 200,
290, 380		 95 7.3 49 30 ● ---
TKMT125H68 68.5 135, 183, 247 220, 260, 340,
380, 500		 125 9.3 61 50 ● ---
TKMT95H54
(aluminum cover)		 54.5 100 to 400
Note) 2		 140, 170, 200,
290, 380		 95 6.2 49 30 --- --- ---
　TKXT形　(プラシリーズ　クローズ形) 9.6 95 52.5
TKXT Series
 TKXT165H105 105 200～1000 250 165 9.6 95 52.5 ● ---

Note)

1. The maximum cable/hose outer diameter for bending radius varies depending on the cable/hose. Please contact the cable/hose manufacturer.

2. Special widths can be manufactured in 1mm increments between the minimum and maximum values in the table.

3. Special widths can be manufactured in 8mm increments between the minimum and maximum values in the table.

4. Special widths can be manufactured in 16mm increments between the minimum and maximum values in the table.

5. Applicable, but please contact us for further consideration.