Handling support
[Applicable products]
- Large size conveyor chain
- Small size conveyor chain
- Drive chain
- Sprocket and Pin gear drive
- Cable Carrier (CABLEVEYOR)
- Synchronous Belts and pulleys
- Plastic modular chain
- Top chain
- Plastic block chain
To ensure that the product you purchased performs to its full potential, it must be handled properly.
We will provide advice on how to handle applicable products when customers install them or when they are in operation.
Are you having trouble with these issues?
- I have no experience in replacing chains and sprockets, so I don't know how to handle them.
- I would like you to be present when connecting the chain and installing the sprockets.
For example, I would like to know how to remove it from the packaging box, how to connect it, and how to cut and join it. - I would like some advice on how to check operation during test run.
TSUBAKI handling support
Our dedicated staff will visit your site and provide advice on how to handle the product.
We will inform the person in charge of any points to be careful of the next time you replace the part.
[Support examples]
- Advice on how to remove the product from the packaging box, and how to cut and connect and connect the chain
- Advice on attaching slats and other transport attachments to chains
- Advice on checking operation during test run (chain tension, correcting misalignment)
If you are considering using this service outside of Japan, the service content may vary depending on the location.
Please contact your nearest overseas office via the link below.