grade	steel cage type steel cage type High guard series Non-steel type
销齿路形态	Flat type Angular shape

Usage conditions
movement angle	β	* * * *	[°]
Operating department quality	M	* *	[kg]
running speed	V	* * * *	[m/min]
Car friction coefficient	μs	* *
Vehicle friction coefficient	μr	* *
Decrease speed time	t	* *	[s]

Operating status * *

Uniform charge The disadvantage of having a small amount of protection The disadvantage of having a large scale

Temporary running time * *

three hours or less 12 hours or less 12 hours too long

Number of movements and stops per minute * *

9 times or less 10 or more times

Charge calculation
				increase rate of force	Fa		[kN]
				Frictional load force	Ff		[kN]
				gravity load force	Fg		[kN]
				connection loss	Fw		[kN]
Number of systems used
				Number of systems used	Ks
Connection speed	Ve		[m/min]	velocity system number	Kv
Modified charges
				Modified connection fee	Ft		[kN]
Scroll selection results
Part number				connection fee	Fp		[kN]

Specified shape
Number of flights	NT1	* *		Required total length		*	[mm]

wheel shape

B C

Selected model number
Type number			distance	P		[mm]
Katsujo type number			Total length of the flight	La2		[mm]

Outer diameter of bolt	Do		[mm]	Speed of driving back	n1		[r/min]
Diameter of steering wheel	Da		[mm]	Cargo dynamics	Pw		[kW]

Approximate the outer diameter of the flight. Confirmed reading.

Reference model number	This is a product with a size ratio selection of size number 1. Use safe mathematical confirmation or comparison.
Part number			connection fee	Fp		[kN]
Number of flights	NT1

Type number			distance	P		[mm]
Katsujo type number			Total length of the flight	La2		[mm]

Outer diameter of bolt	Do		[mm]	Speed of driving back	n1		[r/min]
Diameter of steering wheel	Da		[mm]	Cargo dynamics	Pw		[kW]

Approximate the outer diameter of the flight. Confirmed reading.

This selection type accounting book arrangement general calculation formula accounting charge connection load. Based on the transportation status of the connection, the results of the selection of the selected item during the recording of the selected item are shown.
The company considers the characteristics of the equipment used, and its own judgment on whether the calculation is correct or not.

calculation formula

First page of reply